Introducing our Audi A3 2.0TDI Sportback Rear Silencer Delete, specifically designed for Audi A3 models produced between 2004 and 2013.

To fit:- Audi A3 2.0TDI Sportback 140bhp ( 2wd )

Year:- 2004 to 2013

• Does not fit petrol models.
• Does not fit 170bhp models.
• Does not fit 3 door models.

Description:-

This high-quality silencer delete not only offers a subtle enhancement in exhaust sound but also provides a minor performance boost by eliminating the restrictive factory rear silencer.

By removing this component, you can experience a more liberated exhaust flow, which can contribute to improved engine efficiency and responsiveness.

It is important to note that when this silencer delete is installed as a standalone modification, the change in sound may be minimal.

For those seeking a more pronounced increase in exhaust note, we recommend pairing the silencer delete with additional modifications, such as a resonator delete pipe or a DPF (Diesel Particulate Filter) delete, or even both, if applicable.

Combining these components will amplify the auditory experience and further enhance performance, allowing you to unlock the full potential of your Audi A3 2.0TDI Sportback.

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us if you require a fitting price.

There is a video of our Audi A3 2.0TDI Sportback exhaust on our YouTube channel.

Please click on the link below to listen to it.

( If there is no link here, there is currently no video available )

Fitting Instructions:

To install the rear silencer delete pipes, follow these straightforward steps for a seamless upgrade.

• Remove Standard Rear Silencer. Begin by carefully detaching the existing rear silencer from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust pipe approximately 3.5 inches away from the silencer to ensure a proper fit for the delete pipes.
• Install Delete Pipe. Once the factory exhaust has been cut, take the rear silencer delete pipe and clamp it securely into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post Audi A3 2.0TDI Sportback (8P) Rear Silencer Delete appeared first on Zaustworx.

Audi A3 8V 1.8TSi Sportback Rear Silencer Delete

Introducing our premium rear silencer delete specifically designed for Audi A3 8V 1.8TSi models manufactured between 2010 and 2015.

To fit:-  Audi A3 8V 1.8TSi 180 Sportback– 178 BHP

Year:- 2013 to 2016

• To fit sportback models only (5 Door)
• Does not fit Quattro models
• Does not fit diesel models

Description:-

Perfect for enthusiasts seeking to elevate their driving experience without the hefty price associated with a full aftermarket exhaust system.

Our rear silencer delete offers an exhilarating, motorsport-inspired exhaust note that will turn heads and make your Audi A3 8V 1.8TSi stand out on the road.

By opting for this silencer delete, you enhance both the aesthetic and auditory appeal of your vehicle, transforming it into a more dynamic and engaging ride.

This product improves exhaust flow and boosts engine efficiency.

If you’re eager to amplify the sound of your Audi A3 8V 1.8TSi without breaking the bank, our rear silencer delete is the perfect solution.

In addition to a richer, more thrilling exhaust note, you will experience a slight performance increase by eliminating the restrictive factory rear silencer, allowing your engine to breathe more freely.

Upgrade your driving experience today with our Audi A3 8V 1.8TSi rear silencer delete, and enjoy the perfect blend of performance, sound, and style!

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price

There is a video of our Audi A3 8V 1.8TSi exhaust on our YouTube channel.

Please click on the link below to listen to it.

https://youtu.be/ukoh9_rkAt8

Fitting Instructions:

To install the resonator delete pipe, follow these straightforward steps for a seamless upgrade.

• Remove Standard Resonator. Begin by carefully detaching the existing resonator from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Look for three distinct dots positioned near the rear silencer, as illustrated in the accompanying photos. You should cut the exhaust pipe at the middle dot to ensure proper alignment and fit.
• In the event that you cannot find the three dots, an alternative method is to measure approximately 14.5 inch from the rear of the silencer and make your cut there, as shown in the provided images.

• Install Delete Pipe. Once the factory exhaust has been cut, take the resonator delete pipe and clamp it securely into position.

• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.

• Use Exhaust Assembly Paste. When fitting the delete pipe, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.

• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new resonator delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post Audi A3 8V 1.8TSi Sportback Rear Silencer Delete appeared first on Zaustworx.

Introducing our premium resonator delete pipe, specifically engineered to fit the Audi A3 8P 1.6 FSi’s original factory exhaust system.

To Fit:- Audi A3 8P 1.6 FSi – 115bhp

Year:- 2003 to 2007

Also fits

• Audi A3 8P 1.4 TFSi – 125bhp – 2003 to 2013
• Seat Altea 1.4 TSi – 125bhp – 2010 to 2011
• Seat Altea XL 1.4 TSi – 125bhp – 2007 to 2011
• Seat Leon Mk2 (1P) 1.4 TSi – 125bhp – 2007 to 2012
• Skoda Yeti 1.4 TSi – 122bhp – 2010 to 2015
• Volkswagen Golf Mk5 1.4 TSi – 122bhp – 2007 to 2008
• Volkswagen Golf Mk5 1.6 FSi – 114bhp – 2005 to 2008
• Volkswagen Golf Plus 1.4 TSi – 122bhp – 2008 to 2012
• Volkswagen Golf Plus 1.6 FSi – 115bhp – 2005 to 2007
• Volkswagen Golf Mk6 1.4 TSi – 121bhp – 2008 to 2012

Description:-

This mid silencer delete pipe is expertly crafted to provide an enhanced auditory experience, delivering a sportier exhaust note without the need to invest in a costly aftermarket exhaust system.
By opting for this resonator delete, you can enjoy a more aggressive sound profile that perfectly complements the performance characteristics of your vehicle.

In addition to the auditory benefits, this modification also offers a slight performance boost by eliminating the restrictive factory exhaust silencer. This allows for improved exhaust flow, which can contribute to a more responsive driving experience.
Our design facilitates the straightforward removal of the centre silencer from your Audi A3 8P 1.6 FSi’s standard exhaust system, making installation a hassle-free process.

This upgrade not only elevates the sound and performance of your car but also enhances your overall driving enjoyment. Embrace the thrill of driving with a more dynamic and engaging exhaust tone, all while maintaining the integrity of your vehicle’s original exhaust setup.

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with all clamps that are required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a price for fitting this part.

There is a video of our Audi A3 8P 1.6 FSi’s Resonator delete that you can view on our youtube channel.

Click on the link below

( If there is no link here, then there is currently no video available )

Fitting Instructions:

To install the resonator delete pipe, follow these straightforward steps for a seamless upgrade.

• Remove Standard Resonator. Begin by carefully detaching the existing resonator from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Look for three distinct dots positioned near the rear silencer, as illustrated in the accompanying photos. You should cut the exhaust pipe at the middle dot to ensure proper alignment and fit.
• In the event that you cannot find the three dots, an alternative method is to measure approximately 15 inches from the rear of the silencer and make your cut there, as shown in the provided images.

• Install Delete Pipe. Once the factory exhaust has been cut, take the resonator delete pipe and clamp it securely into position.

• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.

• Use Exhaust Assembly Paste. When fitting the delete pipe, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.

• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new resonator delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post Audi A3 8P 1.6 FSi Resonator Delete Pipe appeared first on Zaustworx.

Introducing our premium resonator delete pipe, specifically engineered to fit the Audi A3 8P 1.4 TFSi’s original factory exhaust system.

To Fit:- Audi A3 8P 1.4 TFSi – 125bhp

Year:- 2003 to 2013

Also fits

• Audi A3 8P 1.6 FSi – 115bhp – 2003 to 2007
• Seat Altea 1.4 TSi – 125bhp – 2010 to 2011
• Seat Altea XL 1.4 TSi – 125bhp – 2007 to 2011
• Seat Leon Mk2 (1P) 1.4 TSi – 125bhp – 2007 to 2012
• Skoda Yeti 1.4 TSi – 122bhp – 2010 to 2015
• Volkswagen Golf Mk5 1.4 TSi – 122bhp – 2007 to 2008
• Volkswagen Golf Mk5 1.6 FSi – 114bhp – 2005 to 2008
• Volkswagen Golf Plus 1.4 TSi – 122bhp – 2008 to 2012
• Volkswagen Golf Plus 1.6 FSi – 115bhp – 2005 to 2007
• Volkswagen Golf Mk6 1.4 TSi – 121bhp – 2008 to 2012

Description:-

This mid silencer delete pipe is expertly crafted to provide an enhanced auditory experience, delivering a sportier exhaust note without the need to invest in a costly aftermarket exhaust system.
By opting for this resonator delete, you can enjoy a more aggressive sound profile that perfectly complements the performance characteristics of your vehicle.

In addition to the auditory benefits, this modification also offers a slight performance boost by eliminating the restrictive factory exhaust silencer. This allows for improved exhaust flow, which can contribute to a more responsive driving experience.
Our design facilitates the straightforward removal of the centre silencer from your Audi A3 8P 1.4 TFSi’s standard exhaust system, making installation a hassle-free process.

This upgrade not only elevates the sound and performance of your car but also enhances your overall driving enjoyment. Embrace the thrill of driving with a more dynamic and engaging exhaust tone, all while maintaining the integrity of your vehicle’s original exhaust setup.

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with all clamps that are required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a price for fitting this part.

There is a video of our Audi A3 8P 1.4 TFSi exhaust that you can view on our youtube channel.

Click on the link below

https://youtu.be/XoLtP8fNuw0

Fitting Instructions:

To install the resonator delete pipe, follow these straightforward steps for a seamless upgrade.

• Remove Standard Resonator. Begin by carefully detaching the existing resonator from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Look for three distinct dots positioned near the rear silencer, as illustrated in the accompanying photos. You should cut the exhaust pipe at the middle dot to ensure proper alignment and fit.
• In the event that you cannot find the three dots, an alternative method is to measure approximately 15 inches from the rear of the silencer and make your cut there, as shown in the provided images.

• Install Delete Pipe. Once the factory exhaust has been cut, take the resonator delete pipe and clamp it securely into position.

• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.

• Use Exhaust Assembly Paste. When fitting the delete pipe, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.

• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new resonator delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post Audi A3 8P 1.4 TFSi Resonator Delete Pipe appeared first on Zaustworx.

Audi A3 8V 1.8 TSi 180 – Resonator Delete Pipe

Introducing our premium resonator delete pipe, specifically engineered to fit the Audi A3 8V 1.8 TSi 180’s original factory exhaust system.

To Fit:- Audi A3 8V 1.8 TSi 180bhp ( fwd )

Year:- 2013 to 2015

• Fits Saloon and Sportback
• Please note, this only fits the vehicles listed, it will not fit any other vehicle.

Description:-

This mid silencer delete pipe is expertly crafted to provide an enhanced auditory experience, delivering a sportier exhaust note without the need to invest in a costly aftermarket exhaust system.
By opting for this resonator delete, you can enjoy a more aggressive sound profile that perfectly complements the performance characteristics of your vehicle.

In addition to the auditory benefits, this modification also offers a slight performance boost by eliminating the restrictive factory exhaust silencer. This allows for improved exhaust flow, which can contribute to a more responsive driving experience.
Our design facilitates the straightforward removal of the centre silencer from your Audi A3 8V 1.8 TSi 180’s standard exhaust system, making installation a hassle-free process.

This upgrade not only elevates the sound and performance of your car but also enhances your overall driving enjoyment.

Embrace the thrill of driving with a more dynamic and engaging exhaust tone, all while maintaining the integrity of your vehicle’s original exhaust setup.

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• This kit includes all the required clamps for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a price for fitting this part.

There is a video of our Audi A3 8V 1.8 TSi 180’s exhaust that you can view on our youtube channel.

Click on the link below to listen to it.

( If there is no link here, there is no video available )

Fitting Instructions:

To install the resonator delete pipe, follow these straightforward steps for a seamless upgrade.

• Remove Standard Resonator. Begin by carefully detaching the existing resonator from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust pipe approximately 12 inches away from the silencer to ensure a proper fit for the delete pipe.
• Install Delete Pipe. Once the factory exhaust has been cut, take the resonator delete pipe and clamp it securely into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipe, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new resonator delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post Audi A3 8V 1.8 TSi 180 – Resonator Delete Pipe appeared first on Zaustworx.

Audi A3 8V 2.0TFSi Quattro Resonator Delete Pipe

Introducing our premium resonator delete pipe, specifically engineered to fit the Audi A3 8V 2.0TFSi Quattro’s original factory exhaust system.

To Fit:- Audi A3 8V 2.0TFSi Quattro

Year:- 2012 to 2018

• Does not fit 2wd/fwd models.
• Fits all A3 8V 2.0TFSi Quattro models inc Hatch/Saloon/Cabriolet/Sportback.

Description:-

This mid silencer delete pipe is expertly crafted to provide an enhanced auditory experience, delivering a sportier exhaust note without the need to invest in a costly aftermarket exhaust system.

By opting for this resonator delete, you can enjoy a more aggressive sound profile that perfectly complements the performance characteristics of your vehicle.

In addition to the auditory benefits, this modification also offers a slight performance boost by eliminating the restrictive factory exhaust silencer. This allows for improved exhaust flow, which can contribute to a more responsive driving experience.
Our design facilitates the straightforward removal of the centre silencer from your Audi A3 8V 2.0TFSi Quattro’s standard exhaust system, making installation a hassle-free process.

This upgrade not only elevates the sound and performance of your car but also enhances your overall driving enjoyment.

For your customization needs, we offer this product in both die bent and mandrel bent versions, allowing you to choose the option that best suits your preferences.

Embrace the thrill of driving with a more dynamic and engaging exhaust tone, all while maintaining the integrity of your vehicle’s original exhaust setup.

• Important information :-

  • Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
  • Please check your exhaust carefully for compatibility before purchasing.
  • Only fits the vehicle listed. It will NOT fit any other vehicles.

   

   

  • Fully reversible.
  • Clamp on fitment, so no welding required.
  • This kit includes all the required clamps for fitting.
  • Premium quality 304 grade stainless steel.
  • Lifetime guarantee.
  • Fitting is available if required.
  • Contact us on 01282 414902 if you require a price for fitting this part.

There is a video of our Audi A3 8V 2.0TFSi Quattro resonator delete that you can view on our youtube channel.

Click on the link below to listen to it.

( If there is no link here, there is no video available at the moment )

Fitting Instructions:

To install the resonator delete pipe, follow these straightforward steps for a seamless upgrade.

• Remove Standard Resonator. Begin by carefully detaching the existing resonator from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Look for three distinct dots positioned after the resonator, as illustrated in the accompanying photos. You should cut the exhaust pipe at the middle dot to ensure proper alignment and fit.

• Install Delete Pipe. Once the factory exhaust has been cut, take the resonator delete pipe and clamp it securely into position.

• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.

• Use Exhaust Assembly Paste. When fitting the delete pipe, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.

• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new resonator delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post Audi A3 8V 2.0TFSi Quattro Resonator Delete Pipe appeared first on Zaustworx.

Introducing our premium rear silencer delete specifically designed for Audi A3 8P 3.2 Quattro models manufactured between 2003 and 2009

To fit:- Audi A3 8P 3.2 Quattro Hatchback ( 3dr )

Year:- 2003 to 2009

• Fits 3dr hatchback models only.

Description:-

Perfect for enthusiasts seeking to elevate their driving experience without the hefty price associated with a full aftermarket exhaust system.

Our rear silencer delete offers an exhilarating, motorsport-inspired exhaust note that will turn heads and make your Audi A3 8P 3.2 Quattro stand out on the road.

By opting for this silencer delete, you enhance both the aesthetic and auditory appeal of your vehicle, transforming it into a more dynamic and engaging ride.

This product improves exhaust flow and boosts engine efficiency.

If you’re eager to amplify the sound of your Audi A3 8P 3.2 Quattro without breaking the bank, our rear silencer delete is the perfect solution.

In addition to a richer, more thrilling exhaust note, you will experience a slight performance increase by eliminating the restrictive factory rear silencer, allowing your engine to breathe more freely.

Upgrade your driving experience today with our Audi A3 8P 3.2 Quattro rear silencer delete, and enjoy the perfect blend of performance, sound, and style!

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price

There is a video of our Audi A3 8P 3.2 Quattro exhaust on our YouTube channel.

Please click on the link below to listen to it.

https://youtu.be/nCK1er13GMM

Fitting Instructions:

To install the rear silencer delete pipe, follow these straightforward steps for a seamless upgrade.

• Remove Standard Rear Silencer. Begin by carefully detaching the existing rear silencer from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust pipe approximately 4 inches away from the silencer to ensure a proper fit for the delete pipe.
• Install Delete Pipe. Once the factory exhaust has been cut, take the rear silencer delete pipe and clamp it securely into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post Audi A3 8P 3.2 Quattro Rear Silencer Delete appeared first on Zaustworx.

Introducing our Audi A3 2.0 TDI Rear Silencer Delete, specifically designed for Audi A3 models produced between 2003 and 2012.

To fit:- Audi A3 2.0 TDI 140bhp

Year:- 2003 to 20012

• Does not fit petrol models.
• Does not fit 170bhp models.
• Does not fit Sportback.

Description:-

This high-quality silencer delete not only offers a subtle enhancement in exhaust sound but also provides a minor performance boost by eliminating the restrictive factory rear silencer.

By removing this component, you can experience a more liberated exhaust flow, which can contribute to improved engine efficiency and responsiveness.

It is important to note that when this silencer delete is installed as a standalone modification, the change in sound may be minimal.

For those seeking a more pronounced increase in exhaust note, we recommend pairing the silencer delete with additional modifications, such as a resonator delete pipe or a DPF (Diesel Particulate Filter) delete, or even both, if applicable.

Combining these components will amplify the auditory experience and further enhance performance, allowing you to unlock the full potential of your Audi A3 2.0 TDI.

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us if you require a fitting price.

There is a video of our Audi A3 2.0 TDI exhaust on our YouTube channel.

Please click on the link below to listen to it.

( If there is no link here, there is currently no video available )

Fitting Instructions:

To install the rear silencer delete pipes, follow these straightforward steps for a seamless upgrade.

• Remove Standard Rear Silencer. Begin by carefully detaching the existing rear silencer from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust pipe approximately 3.5 inches away from the silencer to ensure a proper fit for the delete pipes.
• Install Delete Pipe. Once the factory exhaust has been cut, take the rear silencer delete pipe and clamp it securely into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post Audi A3 2.0 TDI (8P) Rear Silencer Delete appeared first on Zaustworx.

Introducing our premium resonator delete pipe, specifically engineered to fit the Audi A3 8V 1.8TSi Quattro’s original factory exhaust system.

To Fit:- Audi A3 8V 1.8TSi Quattro

Year:- 2012 to 2018

• Does not fit 2wd/fwd models.
• Fits all A3 8V 1.8TSi Quattro models inc Hatch/Saloon/Cabriolet/Sportback.

Description:-

This mid silencer delete pipe is expertly crafted to provide an enhanced auditory experience, delivering a sportier exhaust note without the need to invest in a costly aftermarket exhaust system.

By opting for this resonator delete, you can enjoy a more aggressive sound profile that perfectly complements the performance characteristics of your vehicle.

In addition to the auditory benefits, this modification also offers a slight performance boost by eliminating the restrictive factory exhaust silencer. This allows for improved exhaust flow, which can contribute to a more responsive driving experience.
Our design facilitates the straightforward removal of the centre silencer from your Audi A3 8V 1.8TSi Quattro’s standard exhaust system, making installation a hassle-free process.

This upgrade not only elevates the sound and performance of your car but also enhances your overall driving enjoyment.

For your customization needs, we offer this product in both die bent and mandrel bent versions, allowing you to choose the option that best suits your preferences.

Embrace the thrill of driving with a more dynamic and engaging exhaust tone, all while maintaining the integrity of your vehicle’s original exhaust setup.

• Important information :-

  • Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
  • Please check your exhaust carefully for compatibility before purchasing.
  • Only fits the vehicle listed. It will NOT fit any other vehicles.

   

   

  • Fully reversible.
  • Clamp on fitment, so no welding required.
  • This kit includes all the required clamps for fitting.
  • Premium quality 304 grade stainless steel.
  • Lifetime guarantee.
  • Fitting is available if required.
  • Contact us on 01282 414902 if you require a price for fitting this part.

There is a video of our Audi A3 8V 1.8TSi Quattro resonator delete that you can view on our youtube channel.

Click on the link below to listen to it.

( If there is no link here, there is no video available at the moment )

Fitting Instructions:

To install the resonator delete pipe, follow these straightforward steps for a seamless upgrade.

• Remove Standard Resonator. Begin by carefully detaching the existing resonator from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Look for three distinct dots positioned after the resonator, as illustrated in the accompanying photos. You should cut the exhaust pipe at the middle dot to ensure proper alignment and fit.

• Install Delete Pipe. Once the factory exhaust has been cut, take the resonator delete pipe and clamp it securely into position.

• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.

• Use Exhaust Assembly Paste. When fitting the delete pipe, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.

• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new resonator delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post Audi A3 1.8TSi (8V) Quattro Resonator Delete Pipe appeared first on Zaustworx.

Introducing our premium resonator delete pipe, specifically engineered to fit the Audi A3 8P 3.2 Quattro’s original factory exhaust system.

To Fit:- Audi A3 8P 3.2 Quattro

Year:- 2003 to 2012

• Fits all A3 8P 3.2 Quattro models
• Choose from die bent or mandrel bent versions.

Description:-

This mid silencer delete pipe is expertly crafted to provide an enhanced auditory experience, delivering a sportier exhaust note without the need to invest in a costly aftermarket exhaust system.

By opting for this resonator delete, you can enjoy a more aggressive sound profile that perfectly complements the performance characteristics of your vehicle.

In addition to the auditory benefits, this modification also offers a slight performance boost by eliminating the restrictive factory exhaust silencer. This allows for improved exhaust flow, which can contribute to a more responsive driving experience.
Our design facilitates the straightforward removal of the centre silencer from your Audi A3 8P 3.2 Quattro’s standard exhaust system, making installation a hassle-free process.

This upgrade not only elevates the sound and performance of your car but also enhances your overall driving enjoyment.

For your customization needs, we offer this product in both die bent and mandrel bent versions, allowing you to choose the option that best suits your preferences.

Embrace the thrill of driving with a more dynamic and engaging exhaust tone, all while maintaining the integrity of your vehicle’s original exhaust setup.

• Important information :-

  • Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
  • Please check your exhaust carefully for compatibility before purchasing.
  • Only fits the vehicle listed. It will NOT fit any other vehicles.

   

   

  • Fully reversible.
  • Clamp on fitment, so no welding required.
  • This kit includes all the required clamps for fitting.
  • Premium quality 304 grade stainless steel.
  • Lifetime guarantee.
  • Fitting is available if required.
  • Contact us on 01282 414902 if you require a price for fitting this part.

There is a video of our Audi A3 8P 3.2 Quattro resonator delete that you can view on our youtube channel.

Click on the link below to listen to it.

https://www.youtube.com/watch?v=RyPRJoNt5zI

Fitting Instructions:

To install the resonator delete pipe, follow these straightforward steps for a seamless upgrade.

• Remove Standard Resonator. Begin by carefully detaching the existing resonator from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure 4 inches from the rear of the resonator and make your cut there, as shown in the provided images.
• Install Delete Pipe. Once the factory exhaust has been cut, take the resonator delete pipe and clamp it securely into position.

• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.

• Use Exhaust Assembly Paste. When fitting the delete pipe, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.

• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new resonator delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post Audi A3 8P 3.2 Quattro Resonator Delete Pipe appeared first on Zaustworx.