Introducing our Audi A3 2.0TDI Sportback Rear Silencer Delete, specifically designed for Audi A3 models produced between 2004 and 2013.

To fit:- Audi A3 2.0TDI Sportback 140bhp ( 2wd )

Year:- 2004 to 2013

• Does not fit petrol models.
• Does not fit 170bhp models.
• Does not fit 3 door models.

Description:-

This high-quality silencer delete not only offers a subtle enhancement in exhaust sound but also provides a minor performance boost by eliminating the restrictive factory rear silencer.

By removing this component, you can experience a more liberated exhaust flow, which can contribute to improved engine efficiency and responsiveness.

It is important to note that when this silencer delete is installed as a standalone modification, the change in sound may be minimal.

For those seeking a more pronounced increase in exhaust note, we recommend pairing the silencer delete with additional modifications, such as a resonator delete pipe or a DPF (Diesel Particulate Filter) delete, or even both, if applicable.

Combining these components will amplify the auditory experience and further enhance performance, allowing you to unlock the full potential of your Audi A3 2.0TDI Sportback.

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us if you require a fitting price.

There is a video of our Audi A3 2.0TDI Sportback exhaust on our YouTube channel.

Please click on the link below to listen to it.

( If there is no link here, there is currently no video available )

Fitting Instructions:

To install the rear silencer delete pipes, follow these straightforward steps for a seamless upgrade.

• Remove Standard Rear Silencer. Begin by carefully detaching the existing rear silencer from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust pipe approximately 3.5 inches away from the silencer to ensure a proper fit for the delete pipes.
• Install Delete Pipe. Once the factory exhaust has been cut, take the rear silencer delete pipe and clamp it securely into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post Audi A3 2.0TDI Sportback (8P) Rear Silencer Delete appeared first on Zaustworx.

Audi A3 8V 1.8TSi Sportback Rear Silencer Delete

Introducing our premium rear silencer delete specifically designed for Audi A3 8V 1.8TSi models manufactured between 2010 and 2015.

To fit:-  Audi A3 8V 1.8TSi 180 Sportback– 178 BHP

Year:- 2013 to 2016

• To fit sportback models only (5 Door)
• Does not fit Quattro models
• Does not fit diesel models

Description:-

Perfect for enthusiasts seeking to elevate their driving experience without the hefty price associated with a full aftermarket exhaust system.

Our rear silencer delete offers an exhilarating, motorsport-inspired exhaust note that will turn heads and make your Audi A3 8V 1.8TSi stand out on the road.

By opting for this silencer delete, you enhance both the aesthetic and auditory appeal of your vehicle, transforming it into a more dynamic and engaging ride.

This product improves exhaust flow and boosts engine efficiency.

If you’re eager to amplify the sound of your Audi A3 8V 1.8TSi without breaking the bank, our rear silencer delete is the perfect solution.

In addition to a richer, more thrilling exhaust note, you will experience a slight performance increase by eliminating the restrictive factory rear silencer, allowing your engine to breathe more freely.

Upgrade your driving experience today with our Audi A3 8V 1.8TSi rear silencer delete, and enjoy the perfect blend of performance, sound, and style!

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price

There is a video of our Audi A3 8V 1.8TSi exhaust on our YouTube channel.

Please click on the link below to listen to it.

https://youtu.be/ukoh9_rkAt8

Fitting Instructions:

To install the resonator delete pipe, follow these straightforward steps for a seamless upgrade.

• Remove Standard Resonator. Begin by carefully detaching the existing resonator from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Look for three distinct dots positioned near the rear silencer, as illustrated in the accompanying photos. You should cut the exhaust pipe at the middle dot to ensure proper alignment and fit.
• In the event that you cannot find the three dots, an alternative method is to measure approximately 14.5 inch from the rear of the silencer and make your cut there, as shown in the provided images.

• Install Delete Pipe. Once the factory exhaust has been cut, take the resonator delete pipe and clamp it securely into position.

• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.

• Use Exhaust Assembly Paste. When fitting the delete pipe, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.

• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new resonator delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post Audi A3 8V 1.8TSi Sportback Rear Silencer Delete appeared first on Zaustworx.

Audi S5 Sportback 3.0 V6 Rear Silencer Deletes

Introducing our premium rear silencer deletes specifically designed for Audi S5 Sportback 3.0 V6 models manufactured between 2009 and 2017.

To fit:- Audi S5 Sportback 3.0 V6

Year :- 2009 to 2017

• Fits Sportback, Coupe and Cabriolet models.

Description:-

Perfect for enthusiasts seeking to elevate their driving experience without the hefty price associated with a full aftermarket exhaust system.

Our rear silencer deletes offer an exhilarating, motorsport-inspired exhaust note that will turn heads and make your Audi S5 Sportback 3.0 V6 stand out on the road.

By opting for these silencer deletes, you enhance both the aesthetic and auditory appeal of your vehicle, transforming it into a more dynamic and engaging ride.

This product improves exhaust flow and boosts engine efficiency.

If you’re eager to amplify the sound of your Audi S5 Sportback 3.0 V6 without breaking the bank, our rear silencer deletes are the perfect solution.

Upgrade your driving experience today with our Audi S5 Sportback 3.0 V6 rear silencer deletes, and enjoy the perfect blend of performance, sound, and style!

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price.

There are videos of our Audi S5 Sportback 3.0 V6 exhaust on our YouTube channel.

Please click on the links below to listen to them.

https://youtu.be/yAOeofnI4CU

Fitting Instructions:

To install the rear silencer delete pipes, follow these straightforward steps for a seamless upgrade.

• Remove Standard Rear Silencers: Begin by carefully detaching the existing rear silencers from your vehicle’s exhaust system.
• Prepare the Exhaust: Using the provided photos as a reference. Measure and cut the exhaust pipe approximately 3 inches away from the silencers to ensure a proper fit for the delete pipes.
• Install Delete Pipes: Once the factory exhaust has been cut, take the rear silencer delete pipes and clamp them securely into position.
• Recommended Tools: For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste: When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that we do not include this paste with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help: We designed this kit for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise that you seek the assistance of a professional mechanic to ensure that you complete the installation safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipes!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post Audi S5 Sportback 3.0 V6 Rear Silencer Deletes appeared first on Zaustworx.