Ford Focus Mk2 2.0TDCi Resonator Delete Pipe

Introducing our premium resonator delete, specifically engineered to seamlessly integrate with the standard factory OE exhaust system of the Ford Focus Mk2 2.0TDCi.

To Fit :- Ford Focus 2.0TDCi 133bhp

Year :- 2004 to 2008

Description:-

This high-quality resonator delete not only offers a subtle enhancement in exhaust sound but also provides a minor performance boost by eliminating the restrictive factory resonator.

By removing this component, you can experience a more liberated exhaust flow, which can contribute to improved engine efficiency and responsiveness.

It is important to note that when this resonator delete is installed as a standalone modification, the change in sound may be minimal.

For those seeking a more pronounced increase in exhaust note, we recommend pairing the silencer delete with additional modifications, such as a decat pipe or a DPF (Diesel Particulate Filter) delete, or even both, if applicable.

Combining these components will amplify the auditory experience and further enhance performance, allowing you to unlock the full potential of your Ford Focus Mk2 2.0TDCi.

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us if you require a fitting price.

There is a video of our Ford Focus Mk2 2.0TDCi exhaust on our YouTube channel.

Please click on the link below to listen to it.

( If there is no link here, there is currently no video available )

Fitting Instructions:

To install the resonator delete pipe, follow these straightforward steps for a seamless upgrade.

• Remove Standard Resonator. Begin by carefully detaching the existing resonator from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust pipe approximately 2 inches shorter than the resonator delete to ensure a proper fit for the delete pipe.
• Install Delete Pipe. After you cut the factory exhaust, securely clamp the resonator delete pipe into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipe, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new resonator delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post Ford Focus Mk2 2.0TDCi Resonator Delete Pipe appeared first on Zaustworx.

To Fit :  FORD FOCUS 1.4i

Year : 2005-2012

This flange can be used for the following applications.

• Custom downpipe.
• Sports catalytic converter.
• Decat pipe.
• Custom exhaust system.

This is the correct flange size to fit the standard front pipe or catalytic converter on the FORD FOCUS 1.4i.

We use these flanges on our own mail order products, so you can be sure you are getting a quality product that fits correctly.

Ideal for use in manufacturing custom exhausts or repairing damaged exhaust systems.

• 304 grade stainless steel.
• 8mm thick.
• Laser cut for accuracy.
• 58mm bore.
• 10mm bolt holes with correct spacing for the FORD FOCUS 1.4i.
• 104mm hole centres.
• Made in the UK.

At Zaustworx we have a large range of universal exhaust flanges and an even larger range of car specific exhaust flanges that are ideal for use in making custom exhaust systems, downpipes, decat pipes, dpf deletes and many other applications.

We are constantly adding to our large range of flanges that we have available.

Have a look through our range and if you can not find the flange to suit your requirements, contact us and we may be able to help.

Contact us by email or phone

or message us on our facebook page https://www.facebook.com/ZaustworxCustomExhausts

Other fabrication parts

We sell everything needed for you to build your own exhaust system.

Click on the link below to see what other parts we have available.

https://www.zaustworx.co.uk/product-category/fabrication-parts/

Zaustworx are one of the largest manufacturers of stainless steel exhaust silencers in the UK and have been manufacturing silencers for trade customers and race teams for over 20 years.

All materials and components are sourced from UK based manufacturers.

With over 25 years of custom exhaust and fabrication experience you can rest assured that you are in the right place as the quality of our products are second to none.

Shipping, Returns & FAQ’s

We always try to dispatch orders within 48 hours from receiving the order ( except weekends and bank holidays )

You may however, experience delays depending on the quantity of your order and our current workload.

If you would like to order a large quantity of our exhaust fabrication parts, please contact us for an estimated delivery time.

Cant find what you are looking for ?

Please contact us on our facebook page to discuss your needs.

https://www.facebook.com/ZaustworxCustomExhausts

The post FORD FOCUS 1.4i Exhaust flange appeared first on Zaustworx.

Ford Focus 1.0 Ecoboost Resonator Delete Pipe

Introducing our premium resonator delete, specifically engineered to seamlessly integrate with the standard factory OE exhaust system of the Ford Focus 1.0 Ecoboost.

To Fit :- Ford Focus 1.0 Ecoboost Mk3

Year :- 2012 to 2018

Description:-

We have engineered our resonator delete specifically to fit the standard factory OE exhaust system of the Ford Focus 1.0 Ecoboost models.

This component is designed to enhance your driving experience by providing a subtly sportier exhaust note, all without the need to invest in a full aftermarket exhaust system. By eliminating the restrictive factory resonator, this upgrade allows for improved exhaust flow, which can result in a modest increase in performance.

In summary, installing our resonator delete will deliver a more engaging exhaust sound and a slight performance boost, making it an ideal choice for enthusiasts seeking a cost-effective enhancement for their Ford Focus 1.0 Ecoboost.

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us if you require a fitting price.

There is a video of our Ford Focus 1.0 Ecoboost exhaust on our YouTube channel.

Please click on the link below to listen to it.

https://youtu.be/zW-75IlVjns

Fitting Instructions:

To install the resonator delete pipe, follow these straightforward steps for a seamless upgrade.

• Remove Standard Resonator. Begin by carefully detaching the existing resonator from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust at each side of the existing silencer to ensure a proper fit for the delete pipe.
• Install Delete Pipe. After you cut the factory exhaust, securely clamp the resonator delete pipe into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipe, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new resonator delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post Ford Focus 1.0 Ecoboost Resonator Delete Pipe appeared first on Zaustworx.

To Fit :- Ford Focus 1.6 Duratec 125bhp Mk3

Year :- 2012 to 2018

Description :-

This is a centre silencer delete / mid silencer delete / resonator delete / deres pipe designed to fit the Ford Focus 1.6 Duratec Mk3 standard factory oe exhaust system.

This part is designed to give a slightly sportier sound without the need to buy an expensive aftermarket exhaust system.

You will also gain a small performance advantage by removing the restrictive, standard exhaust silencer.

Designed to easily remove the centre silencer on your Ford Focus 1.6 Duratec’s standard exhaust system.

Will also give extra performance and a slightly sportier tone when fitted.

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.
• Fits the Hatchback & Estate models.

Please contact us on our facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price.

There is a video of this exhaust on our youtube channel.

Click on the link below

Hand made to order, so please allow up to 24 hours for dispatch. ( Excluding weekends )

Fitting instructions :-

• Simply cut the standard exhaust at each side of the silencer, then clamp this new part into position.
• We recommend using a power saw for easy access and accuracy.
• You will need to use exhaust assembly paste when fitting this part. ( Not supplied )
• Designed for easy DIY fitment.
• If you have any doubts about fitting it yourself, then we would recommend professional fitting.

This is a genuine Zaustworx part.

Designed, developed and manufactured by ourselves on our own premises in the UK.

We only use high quality UK sourced 304 grade stainless steel.

We have 25+ years experience in the exhaust industry.

The post Ford Focus 1.6 Duratec Resonator Delete Pipe appeared first on Zaustworx.

Ford Focus ST250 Resonator Delete Pipe

Introducing our premium resonator delete, specifically engineered to seamlessly integrate with the standard factory OE exhaust system of the Ford Focus ST250.

To Fit :- Ford Focus ST250 Mk3

Year :- 2012 to 2019

Description:-

We have engineered our resonator delete specifically to fit the standard factory OE exhaust system of the Ford Focus ST250 models.

This component is designed to enhance your driving experience by providing a subtly sportier exhaust note, all without the need to invest in a full aftermarket exhaust system. By eliminating the restrictive factory resonator, this upgrade allows for improved exhaust flow, which can result in a modest increase in performance.

In summary, installing our resonator delete will deliver a more engaging exhaust sound and a slight performance boost, making it an ideal choice for enthusiasts seeking a cost-effective enhancement for their Ford Focus ST250.

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us if you require a fitting price.

There is a video of our Ford Focus ST250 exhaust on our YouTube channel.

Please click on the link below to listen to it.

https://youtu.be/5P-xuJKNoHk

Fitting Instructions:

To install the resonator delete pipe, follow these straightforward steps for a seamless upgrade.

• Remove Standard Resonator. Begin by carefully detaching the existing resonator from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust at each side of the existing silencer to ensure a proper fit for the delete pipe.
• Install Delete Pipe. After you cut the factory exhaust, securely clamp the resonator delete pipe into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipe, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new resonator delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post Ford Focus ST250 Resonator Delete Pipe appeared first on Zaustworx.

Ford Focus ST225 Resonator Delete Pipe

Introducing our premium resonator delete, specifically engineered to seamlessly integrate with the standard factory OE exhaust system of the Ford Focus ST225.

To Fit :- Ford Focus Mk2 ST225

Year :- 2005 to 2012

Description:-

We have engineered our resonator delete specifically to fit the standard factory OE exhaust system of the Ford Focus ST225.

This component is designed to enhance your driving experience by providing a subtly sportier exhaust note, all without the need to invest in a full aftermarket exhaust system. By eliminating the restrictive factory resonator, this upgrade allows for improved exhaust flow, which can result in a modest increase in performance.

In summary, installing our resonator delete will deliver a more engaging exhaust sound and a slight performance boost, making it an ideal choice for enthusiasts seeking a cost-effective enhancement for their Ford Focus ST225.

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us if you require a fitting price.

There is a video of our Ford Focus ST225 exhaust on our YouTube channel.

Please click on the link below to listen to it.

https://youtu.be/BDowBlgHb-0

Fitting Instructions:

To install the resonator delete pipe, follow these straightforward steps for a seamless upgrade.

• Remove Standard Resonator. Begin by carefully detaching the existing resonator from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust pipe approximately 2.75 inches after the exhaust silencer and 7″ in front of the silencer to ensure a proper fit for the delete pipe.
• Install Delete Pipe. After you cut the factory exhaust, securely clamp the resonator delete pipe into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipe, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new resonator delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post Ford Focus ST225 Resonator Delete Pipe appeared first on Zaustworx.