BMW 325d E9X Rear Silencer Delete

Introducing our BMW 325d E9X Rear Silencer Delete, specifically designed for BMW 325d models produced between 2005 and 2012.

To fit:- BMW 325d E9X (E90/E91/E92/E93)

Year:- 2005 to 2012

• Fits all models including automatic and x drive.
• Also fits 330d.
• This exhaust will only fit the diesel models, it will not fit petrol models.

Description:-

This high-quality silencer delete not only offers a subtle enhancement in exhaust sound but also provides a minor performance boost by eliminating the restrictive factory rear silencer.

By removing this component, you can experience a more liberated exhaust flow, which can contribute to improved engine efficiency and responsiveness.

It is important to note that when this silencer delete is installed as a standalone modification, the change in sound may be minimal.

For those seeking a more pronounced increase in exhaust note, we recommend pairing the silencer delete with additional modifications, such as a resonator delete pipe or a DPF (Diesel Particulate Filter) delete, or even both, if applicable.

Combining these components will amplify the auditory experience and further enhance performance, allowing you to unlock the full potential of your BMW 325d E9X.

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price.

There is a video of our BMW 325d E9X exhaust on our YouTube channel.

Please click on the link below to listen to it.

https://youtu.be/pg9z5UKWnNM

Fitting Instructions:

To install the rear silencer delete pipes, follow these straightforward steps for a seamless upgrade.

• Remove Standard Rear Silencer. Begin by carefully detaching the existing rear silencer from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust pipe approximately 4 inches away from the silencer to ensure a proper fit for the delete pipes.
• Install Delete Pipe. Once the factory exhaust has been cut, take the rear silencer delete pipe and clamp it securely into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post BMW 325d E9X Rear Silencer Delete appeared first on Zaustworx.

BMW 318d E9X Resonator Delete Pipe

Introducing our BMW 318d E9X Resonator delete, specifically designed for BMW 318d E9X models produced between 2004 and 2013.

To Fit:- BMW 318D E9X (E90/E91/E92/E93)

Year:- 2004 to 2013

Description:-

This precision-designed component allows for straightforward removal of the factory center silencer on the BMW 318d E9X.

In addition to eliminating the center silencer, our pipe also addresses and removes the restrictive section of the factory exhaust – particularly where the pipework passes over the central chassis brace (refer to photos for details). By replacing this bottleneck, the exhaust gases can flow more freely, resulting in reduced backpressure.

The installation of this resonator delete pipe offers a modest increase in performance due to the improved exhaust flow and the elimination of the restrictive silencer. Customers can expect a subtle enhancement in throttle response and potentially a slight gain in horsepower, all while retaining compatibility with the standard exhaust system.

It is important to note that when this silencer delete is installed as a standalone modification, the change in sound may be minimal.

For those seeking a more pronounced increase in exhaust note, we recommend pairing the silencer delete with additional modifications, such as a resonator delete pipe or a DPF (Diesel Particulate Filter) delete, or even both, if applicable.

Combining these components will amplify the auditory experience and further enhance performance, allowing you to unlock the full potential of your BMW 318d E9X.

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price.

There is a video of our BMW 318d E9X Resonator delete pipe on our YouTube channel.

Please click on the link below to listen to it.

(If there is no video link here there is no video available at this time)

Fitting Instructions:

To install the resonator delete pipe, follow these straightforward steps for a seamless upgrade.

• Remove Standard Rear Silencer. Begin by carefully detaching the existing resonator from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust pipe approximately 7 inches away from the floor brace to ensure a proper fit for the delete pipe.
• Install Delete Pipe. After you cut the factory exhaust, securely clamp the resonator delete pipe into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post BMW 318d E9X Resonator Delete Pipe appeared first on Zaustworx.

Introducing our BMW 318d E90/E92 335 Style Twin Exit Rear Silencer Delete / Exhaust Conversion Kit, designed to transform your 318d into a striking replica of the sporty 335i model.

To fit:- BMW 318d E90/E92

Year:- 2004 to 2013

• This kit will only fit the diesel models, it will not fit petrol models.
• To fit BMW E90 / E92 (will not fit E91/E93).
• Will fit some E91 models if they do not have the floor bracing after the diff.

Description:-

With this conversion kit, transforming your BMW 318d to resemble the sporty and sophisticated 335i has never been easier.

Our 335 style rear silencer delete seamlessly integrates with your existing exhaust system, providing a striking visual upgrade while optimizing performance.

Whether you’re looking to make a bold statement on the road or simply want to enjoy a more exhilarating driving experience, our conversion kit is the perfect solution.

Embrace the ultimate blend of style and functionality with our BMW 318d E90/E92 335 Style Twin Exit Rear Exhaust Conversion Kit today!

Upgrade your BMW 318d E90/E92 today and enjoy the sporty look of the 335i!

It is important to note that when this silencer delete is installed as a standalone modification, the change in sound may be minimal.

For those seeking a more pronounced increase in exhaust note, we recommend pairing the silencer delete with additional modifications, such as a resonator delete pipe or a DPF (Diesel Particulate Filter) delete, or even both, if applicable.

Combining these components will amplify the auditory experience and further enhance performance, allowing you to unlock the full potential of your BMW 318d E90/E92.

Rear valance :-

This comprehensive kit comes with all the necessary components required for a seamless installation on your vehicle. ( Except rear valance )

You can source a genuine BMW rear valance from any authorized BMW dealership to complete your conversion.

If you prefer, you can also order from our local BMW main agent, Lloyd Colne BMW, who is more than happy to assist with mail orders. For inquiries, feel free to call them on 01282 881513 and ask for Robbo.

E90 and E91 models, the relevant part number for the rear valance is 51127892269.

E92 and E93 models, the relevant part number for the rear valance is 51128043897.

Please keep in mind that we cannot guarantee proper fitment when used with aftermarket rear valance.

Important information :-

• • Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
  • Please check your exhaust carefully for compatibility before purchasing.
  • Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price.

There is a video of our BMW 318d E90/E92 335 Style exhaust on our YouTube channel.

Please click on the link below to listen to it.

https://youtu.be/9w2Q6pAaw_U

Please note, the car in the link above has rear and mid silencer deletes fitted.

Fitting Instructions:

Installing the rear silencer delete pipes is a straightforward process that can enhance your vehicle’s performance and sound. Please follow the steps below carefully to ensure a proper fit and optimal results.

• Prepare the Standard Exhaust:
  Using a suitable cutting tool, carefully cut the factory exhaust pipe 8.5 inches away from the exhaust mount, as indicated in the accompanying photos. Ensure that the cut is clean and straight to facilitate a proper connection with the delete pipes.
• Exhaust Bracket:
  Remove the nut from the lower bumper bracket. Then, place the three washers included in the kit onto the stud, followed by the two-hole bracket. Refit the nut securely to hold everything in place.
• Fit the Rubber Mounting Bobbin:
  Next, install the rubber mounting bobbin as shown in the provided images. This component will help absorb vibrations and keep the exhaust system securely mounted.
• Install the Delete Pipes:
  Take the rear silencer delete pipes and position them where the standard exhaust was removed. Use the clamps provided in the kit to secure the delete pipes in place.
• Adjust the Exhaust Position:
  Once everything is in place, you can adjust the position of the exhaust. The delete pipes can be moved left and right as well as up and down by modifying the mounting bracket that comes with the kit. This adjustment ensures that the exhaust aligns perfectly with your vehicle’s aesthetic and functional requirements.

Recommendations:

• Recommended Tools: For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste: When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help: This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipes!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post BMW 318d E90/E92 335 Style Twin Exit Exhaust Conversion appeared first on Zaustworx.

BMW 330d E9X Rear Silencer Delete

Introducing our BMW 330d E9X Rear Silencer Delete, specifically designed for BMW 330d models produced between 2005 and 2012.

To fit:- BMW 330d E9X (E90/E91/E92/E93)

Year:- 2005 to 2012

• Fits all models including automatic and x drive.
• Also fits 325d.
• This exhaust will only fit the diesel models, it will not fit petrol models.

Description:-

This high-quality silencer delete not only offers a subtle enhancement in exhaust sound but also provides a minor performance boost by eliminating the restrictive factory rear silencer.

By removing this component, you can experience a more liberated exhaust flow, which can contribute to improved engine efficiency and responsiveness.

It is important to note that when this silencer delete is installed as a standalone modification, the change in sound may be minimal.

For those seeking a more pronounced increase in exhaust note, we recommend pairing the silencer delete with additional modifications, such as a resonator delete pipe or a DPF (Diesel Particulate Filter) delete, or even both, if applicable.

Combining these components will amplify the auditory experience and further enhance performance, allowing you to unlock the full potential of your BMW 330d E9X.

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price.

There is a video of our BMW 330d E9X exhaust on our YouTube channel.

Please click on the link below to listen to it.

https://youtu.be/jBdYnrUE1PQ

Fitting Instructions:

To install the rear silencer delete pipes, follow these straightforward steps for a seamless upgrade.

• Remove Standard Rear Silencer. Begin by carefully detaching the existing rear silencer from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust pipe approximately 4 inches away from the silencer to ensure a proper fit for the delete pipes.
• Install Delete Pipe. Once the factory exhaust has been cut, take the rear silencer delete pipe and clamp it securely into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post BMW 330d E9X Rear Silencer Delete appeared first on Zaustworx.

BMW 335d E9X Rear Silencer Deletes

Introducing our BMW 335d E9X Rear Silencer Deletes, specifically designed for Audi A6 models produced between 2004 and 2013.

To fit:- BMW 335d E9X (E90/E91/E92/E93)

Year:- 2004 to 2013

• Does not fit petrol models
• Only fits SE bumper, will not fit M Sport models.

Description:-

These high-quality BMW 335d E9X silencer deletes not only offer a subtle enhancement in exhaust sound but also provides a minor performance boost by eliminating the restrictive factory rear silencers.

By removing these components, you can experience a more liberated exhaust flow, which can contribute to improved engine efficiency and responsiveness.

It is important to note : When you install these silencer deletes as a standalone modification, you may notice that the change in sound is minimal.

For those seeking a more pronounced increase in exhaust note, we recommend pairing the silencer deletes with additional modifications, such as a resonator delete pipe or a DPF (Diesel Particulate Filter) delete, or even both, if applicable.

Combining these components will amplify the auditory experience and further enhance performance, allowing you to unlock the full potential of your BMW 335d E9X.

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us if you require a fitting price.

There is a video of our BMW 335d E9X exhaust on our YouTube channel.

Please click on the link below to listen to it.

https://youtu.be/ac-qXnQ2D2Y

Fitting Instructions:

To install the rear silencer delete pipes, follow these straightforward steps for a seamless upgrade.

• Remove Standard Rear Silencer. Begin by carefully detaching the existing rear silencer from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust pipe approximately 4 inches away from the silencer to ensure a proper fit for the delete pipes.
• Install Delete Pipe. Once the factory exhaust has been cut, take the rear silencer delete pipe and clamp it securely into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post BMW 335d E9X Rear Silencer Deletes appeared first on Zaustworx.

BMW 330d 335 Style Twin Exit Exhaust Conversion

Introducing our BMW 330d 335 Style Twin Exit Rear Silencer Delete / Exhaust Conversion Kit, designed to transform your 330d into a striking replica of the sporty 335i model.

To fit:- BMW 330d – E90 / E91 / E92 / E93

Year:- 2004 to 2013

• This kit will only fit the diesel models, it will not fit petrol models.
• To fit BMW E90 / E91 / E92 / E93.

Description:-

With this conversion kit, transforming your BMW 330d to resemble the sporty and sophisticated 335i has never been easier.

Our 335 style rear silencer delete seamlessly integrates with your existing exhaust system, providing a striking visual upgrade while optimizing performance.

Whether you’re looking to make a bold statement on the road or simply want to enjoy a more exhilarating driving experience, our conversion kit is the perfect solution.

Embrace the ultimate blend of style and functionality with our BMW 330d 335 Style Twin Exit Rear Exhaust Conversion Kit today!

Upgrade your BMW 330d today and enjoy the sporty look of the 335i!

It is important to note that when this silencer delete is installed as a standalone modification, the change in sound may be minimal.

For those seeking a more pronounced increase in exhaust note, we recommend pairing the silencer delete with additional modifications, such as a resonator delete pipe or a DPF (Diesel Particulate Filter) delete, or even both, if applicable.

Combining these components will amplify the auditory experience and further enhance performance, allowing you to unlock the full potential of your BMW 330d.

Rear valance :-

This comprehensive kit comes with all the necessary components required for a seamless installation on your vehicle. ( Except rear valance )

You can source a genuine BMW rear valance from any authorized BMW dealership to complete your conversion.

If you prefer, you can also order from our local BMW main agent, Lloyd Colne BMW, who is more than happy to assist with mail orders. For inquiries, feel free to call them on 01282 881513 and ask for Robbo.

E90 and E91 models, the relevant part number for the rear valance is 51127892269.

E92 and E93 models, the relevant part number for the rear valance is 51128043897.

Please keep in mind that we cannot guarantee proper fitment when used with aftermarket rear valance.

Important information :-

• • Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
  • Please check your exhaust carefully for compatibility before purchasing.
  • Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price.

There is a video of our BMW 330d 335 Style exhaust on our YouTube channel.

Please click on the link below to listen to it.

https://www.yps://youtu.be/9w2Q6pAaw_U

Fitting Instructions:

Installing the rear silencer delete pipes is a straightforward process that can enhance your vehicle’s performance and sound. Please follow the steps below carefully to ensure a proper fit and optimal results.

• Prepare the Standard Exhaust:
  Using a suitable cutting tool, carefully cut the factory exhaust pipe 10 inches away from the silencer, as indicated in the accompanying photos. Ensure that the cut is clean and straight to facilitate a proper connection with the delete pipes.
• Exhaust Bracket:
  Remove the nut from the lower bumper bracket. Then, place the three washers included in the kit onto the stud, followed by the two-hole bracket. Refit the nut securely to hold everything in place.
• Fit the Rubber Mounting Bobbin:
  Next, install the rubber mounting bobbin as shown in the provided images. This component will help absorb vibrations and keep the exhaust system securely mounted.
• Install the Delete Pipes:
  Take the rear silencer delete pipes and position them where the standard exhaust was removed. Use the clamps provided in the kit to secure the delete pipes in place.
• Adjust the Exhaust Position:
  Once everything is in place, you can adjust the position of the exhaust. The delete pipes can be moved left and right as well as up and down by modifying the mounting bracket that comes with the kit. This adjustment ensures that the exhaust aligns perfectly with your vehicle’s aesthetic and functional requirements.

Recommendations:

• Recommended Tools: For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste: When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help: This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipes!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post BMW 330d 335 Style Twin Exit Exhaust Conversion appeared first on Zaustworx.

BMW 320d E90/E92 335 Style Twin Exit Exhaust Conversion

Introducing our BMW 320d E90/E92 335 Style Twin Exit Rear Silencer Delete / Exhaust Conversion Kit, designed to transform your 320d into a striking replica of the sporty 335i model.

To fit:- BMW 320d E90/E92

Year:- 2004 to 2013

• This kit will only fit the diesel models, it will not fit petrol models.
• To fit BMW E90 / E92 (will not fit E91/E93).
• Will fit some E91 models if they do not have the floor bracing after the diff.

Description:-

With this conversion kit, transforming your BMW 320d to resemble the sporty and sophisticated 335i has never been easier.

Our 335 style rear silencer delete seamlessly integrates with your existing exhaust system, providing a striking visual upgrade while optimizing performance.

Whether you’re looking to make a bold statement on the road or simply want to enjoy a more exhilarating driving experience, our conversion kit is the perfect solution.

Embrace the ultimate blend of style and functionality with our BMW 320d E90/E92 335 Style Twin Exit Rear Exhaust Conversion Kit today!

Upgrade your BMW 320d E90/E92 today and enjoy the sporty look of the 335i!

It is important to note that when this silencer delete is installed as a standalone modification, the change in sound may be minimal.

For those seeking a more pronounced increase in exhaust note, we recommend pairing the silencer delete with additional modifications, such as a resonator delete pipe or a DPF (Diesel Particulate Filter) delete, or even both, if applicable.

Combining these components will amplify the auditory experience and further enhance performance, allowing you to unlock the full potential of your BMW 320d E90/E92.

Rear valance :-

This comprehensive kit comes with all the necessary components required for a seamless installation on your vehicle. ( Except rear valance )

You can source a genuine BMW rear valance from any authorized BMW dealership to complete your conversion.

If you prefer, you can also order from our local BMW main agent, Lloyd Colne BMW, who is more than happy to assist with mail orders. For inquiries, feel free to call them on 01282 881513 and ask for Robbo.

E90 and E91 models, the relevant part number for the rear valance is 51127892269.

E92 and E93 models, the relevant part number for the rear valance is 51128043897.

Please keep in mind that we cannot guarantee proper fitment when used with aftermarket rear valance.

Important information :-

• • Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
  • Please check your exhaust carefully for compatibility before purchasing.
  • Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price.

There is a video of our BMW 320d E90/E92 335 Style exhaust on our YouTube channel.

Please click on the link below to listen to it.

https://youtu.be/9w2Q6pAaw_U

Please note, the car in the link above has rear and mid silencer deletes fitted.

Fitting Instructions:

Installing the rear silencer delete pipes is a straightforward process that can enhance your vehicle’s performance and sound. Please follow the steps below carefully to ensure a proper fit and optimal results.

• Prepare the Standard Exhaust:
  Using a suitable cutting tool, carefully cut the factory exhaust pipe 8.5 inches away from the exhaust mount, as indicated in the accompanying photos. Ensure that the cut is clean and straight to facilitate a proper connection with the delete pipes.
• Exhaust Bracket:
  Remove the nut from the lower bumper bracket. Then, place the three washers included in the kit onto the stud, followed by the two-hole bracket. Refit the nut securely to hold everything in place.
• Fit the Rubber Mounting Bobbin:
  Next, install the rubber mounting bobbin as shown in the provided images. This component will help absorb vibrations and keep the exhaust system securely mounted.
• Install the Delete Pipes:
  Take the rear silencer delete pipes and position them where the standard exhaust was removed. Use the clamps provided in the kit to secure the delete pipes in place.
• Adjust the Exhaust Position:
  Once everything is in place, you can adjust the position of the exhaust. The delete pipes can be moved left and right as well as up and down by modifying the mounting bracket that comes with the kit. This adjustment ensures that the exhaust aligns perfectly with your vehicle’s aesthetic and functional requirements.

Recommendations:

• Recommended Tools: For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste: When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help: This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipes!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post BMW 320d E90/E92 335 Style Twin Exit Exhaust Conversion appeared first on Zaustworx.

BMW 335i E9X Rear Silencer Deletes

Introducing our BMW 335i E9X Rear Silencer Deletes, specifically designed for BMW 335i E9X models produced between 2004 and 2013.

To fit:- BMW 335i E90 / E91 / E92 / E93

Year:- 2004 to 2013

• Only fits SE bumper, will not fit M Sport models.

Description:-

Our BMW 335i E9X rear silencer delete gives an awesome motorsport inspired note without the need to buy an expensive aftermarket exhaust system.

This rear silencer delete enhances exhaust flow and improves engine efficiency, engineered to deliver a sportier sound and style.

Designed for enthusiasts looking to enhance their vehicle’s performance without compromising on quality.

If you are looking to enhance the sound of your BMW 335i E9X, but do not want to spend a fortune on an aftermarket exhaust system, then this rear silencer delete would be ideal for you.

As well as an improvement in sound, you will also gain a small performance advantage by removing the restrictive, standard rear silencers.

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price

There is a video of our BMW 335i E9X exhaust on our YouTube channel.

Please click on the link below to listen to it.

https://youtu.be/WMRFQBBRo-c

Fitting Instructions:

To install the rear silencer delete pipes, follow these straightforward steps for a seamless upgrade.

• Remove Standard Rear Silencer. Begin by carefully detaching the existing rear silencer from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust pipe approximately 4 inches away from the silencer to ensure a proper fit for the delete pipes.
• Install Delete Pipe. Once the factory exhaust has been cut, take the rear silencer delete pipe and clamp it securely into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post BMW 335i E9X Rear Silencer Deletes appeared first on Zaustworx.

BMW 325d E9X Resonator Delete Pipe

Introducing our BMW 325d E9X Resonator delete, specifically designed for BMW 325d E9X models produced between 2004 and 2013.

To Fit:- BMW 325D E9X ( E90/E91/E92/E93 )

Year:- 2004 to 2013

Description:-

This precision-designed component allows for straightforward removal of the factory center silencer on the BMW 325d E9X.

In addition to eliminating the center silencer, our pipe also addresses and removes the restrictive section of the factory exhaust – particularly where the pipework passes over the central chassis brace (refer to photos for details). By replacing this bottleneck, the exhaust gases can flow more freely, resulting in reduced backpressure.

The installation of this resonator delete pipe offers a modest increase in performance due to the improved exhaust flow and the elimination of the restrictive silencer. Customers can expect a subtle enhancement in throttle response and potentially a slight gain in horsepower, all while retaining compatibility with the standard exhaust system.

It is important to note that when this silencer delete is installed as a standalone modification, the change in sound may be minimal.

For those seeking a more pronounced increase in exhaust note, we recommend pairing the silencer delete with additional modifications, such as a resonator delete pipe or a DPF (Diesel Particulate Filter) delete, or even both, if applicable.

Combining these components will amplify the auditory experience and further enhance performance, allowing you to unlock the full potential of your BMW 325d E9X.

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price.

There is a video of our BMW 325d E9X Resonator delete pipe on our YouTube channel.

Please click on the link below to listen to it.

(If there is no video link here there is no video available at this time)

Fitting Instructions:

To install the resonator delete pipe, follow these straightforward steps for a seamless upgrade.

• Remove Standard Rear Silencer. Begin by carefully detaching the existing resonator from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust pipe approximately 6 inches away from the floor brace to ensure a proper fit for the delete pipe.
• Install Delete Pipe. After you cut the factory exhaust, securely clamp the resonator delete pipe into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post BMW 325d E9X Resonator Delete Pipe appeared first on Zaustworx.

BMW 325d 335 Style Twin Exit Exhaust Conversion

Introducing our BMW 325d 335 Style Twin Exit Rear Silencer Delete / Exhaust Conversion Kit, designed to transform your 325d into a striking replica of the sporty 335i model.

To fit:- BMW 325d – E90 / E91 / E92 / E93

Year:- 2004 to 2013

• This kit will only fit the diesel models, it will not fit petrol models.
• To fit BMW E90 / E91 / E92 / E93.

Description:-

With this conversion kit, transforming your BMW 325d to resemble the sporty and sophisticated 335i has never been easier.

Our 335 style rear silencer delete seamlessly integrates with your existing exhaust system, providing a striking visual upgrade while optimizing performance.

Whether you’re looking to make a bold statement on the road or simply want to enjoy a more exhilarating driving experience, our conversion kit is the perfect solution.

Embrace the ultimate blend of style and functionality with our BMW 325d 335 Style Twin Exit Rear Exhaust Conversion Kit today!

Upgrade your BMW 325d today and enjoy the sporty look of the 335i!

It is important to note that when this silencer delete is installed as a standalone modification, the change in sound may be minimal.

For those seeking a more pronounced increase in exhaust note, we recommend pairing the silencer delete with additional modifications, such as a resonator delete pipe or a DPF (Diesel Particulate Filter) delete, or even both, if applicable.

Combining these components will amplify the auditory experience and further enhance performance, allowing you to unlock the full potential of your BMW 325d.

Rear valance :-

This comprehensive kit comes with all the necessary components required for a seamless installation on your vehicle. ( Except rear valance )

You can source a genuine BMW rear valance from any authorized BMW dealership to complete your conversion.

If you prefer, you can also order from our local BMW main agent, Lloyd Colne BMW, who is more than happy to assist with mail orders. For inquiries, feel free to call them on 01282 881513 and ask for Robbo.

E90 and E91 models, the relevant part number for the rear valance is 51127892269.

E92 and E93 models, the relevant part number for the rear valance is 51128043897.

Please keep in mind that we cannot guarantee proper fitment when used with aftermarket rear valance.

Important information :-

• • Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
  • Please check your exhaust carefully for compatibility before purchasing.
  • Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price.

There is a video of our BMW 325d 335 Style exhaust on our YouTube channel.

Please click on the link below to listen to it.

https://www.yps://youtu.be/9w2Q6pAaw_U

Fitting Instructions:

Installing the rear silencer delete pipes is a straightforward process that can enhance your vehicle’s performance and sound. Please follow the steps below carefully to ensure a proper fit and optimal results.

• Prepare the Standard Exhaust:
  Using a suitable cutting tool, carefully cut the factory exhaust pipe 10 inches away from the silencer, as indicated in the accompanying photos. Ensure that the cut is clean and straight to facilitate a proper connection with the delete pipes.
• Exhaust Bracket:
  Remove the nut from the lower bumper bracket. Then, place the three washers included in the kit onto the stud, followed by the two-hole bracket. Refit the nut securely to hold everything in place.
• Fit the Rubber Mounting Bobbin:
  Next, install the rubber mounting bobbin as shown in the provided images. This component will help absorb vibrations and keep the exhaust system securely mounted.
• Install the Delete Pipes:
  Take the rear silencer delete pipes and position them where the standard exhaust was removed. Use the clamps provided in the kit to secure the delete pipes in place.
• Adjust the Exhaust Position:
  Once everything is in place, you can adjust the position of the exhaust. The delete pipes can be moved left and right as well as up and down by modifying the mounting bracket that comes with the kit. This adjustment ensures that the exhaust aligns perfectly with your vehicle’s aesthetic and functional requirements.

Recommendations:

• Recommended Tools: For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste: When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help: This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipes!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post BMW 325d 335 Style Twin Exit Exhaust Conversion appeared first on Zaustworx.