Audi A6 (C6) 2.0TDi Rear Silencer Deletes

Introducing our Audi A6 (C6) 2.0TDi Rear Silencer Deletes, specifically designed for Audi A6 models produced between 2004 and 2011.

To fit:- Audi A6 (C6) 2.0TDi

Year:- 2004 to 2011

• Fits saloon and avant.

Description:-

These high-quality Audi A6 (C6) 2.0TDi silencer deletes not only offer a subtle enhancement in exhaust sound but also provides a minor performance boost by eliminating the restrictive factory rear silencers.

By removing these components, you can experience a more liberated exhaust flow, which can contribute to improved engine efficiency and responsiveness.

It is important to note : When you install these silencer deletes as a standalone modification, you may notice that the change in sound is minimal.

For those seeking a more pronounced increase in exhaust note, we recommend pairing the silencer deletes with additional modifications, such as a resonator delete pipe or a DPF (Diesel Particulate Filter) delete, or even both, if applicable.

Combining these components will amplify the auditory experience and further enhance performance, allowing you to unlock the full potential of your Audi A6 (C6) 2.0TDi.

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us if you require a fitting price.

There is a video of our Audi A6 (C6) 2.0TDi exhaust on our YouTube channel.

Please click on the link below to listen to it.

If there is no link here, there is no video available yet

Fitting Instructions:

To install the rear silencer delete pipes, follow these straightforward steps for a seamless upgrade.

• Remove Standard Rear Silencer. Begin by carefully detaching the existing rear silencers from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust pipe 2 inches away from the bracket to ensure a proper fit for the delete pipes.
• Install Delete Pipe. Once the factory exhaust has been cut, take the rear silencer delete pipes and clamp them securely into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post Audi A6 (C6) 2.0TDi Rear Silencer Deletes appeared first on Zaustworx.

To fit:- Volkswagen Golf 2.0TDi Mk7 -148bhp

Year:- 2012 to 2020

• Fits Mk7 and Mk7.5 models.
• Does not fit 4 motion models.
• Does not fit estate models.
• Requires GTi rear valance for fitment. ( not supplied )

Description:-

This is our Volkswagen Golf 2.0TDi Mk7 – GTi Style Cat back exhaust for Volkswagen Golf 2.0TDi Mk7 and MK 7.5  models that were produced from 2012 to 2020.

Our Volkswagen Golf 2.0TDi Mk7 – GTi Style Cat back exhaust (Resonated) is made from 2.5″ / 63.5mm mandrel bent pipework and fits from the DPF backwards and is supplied with a choice of tailpipe options.

This exhaust replaces the standard exhaust system and converts it to the Golf GTI style twin exit and is capable of handling power outputs of up to 480bhp.

The VW Golf GTI rear valance is required to enable this exhaust to fit. ( Not supplied )

Please Note : Performance exhaust systems on diesel vehicles are very quiet compared to petrol models.

To get a louder exhaust note you may also need to fit a DPF delete.

• Only fits the vehicle listed. It will NOT fit any other vehicles.

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us if you require a fitting price.

Hand made to order, so please allow 24 to 48hours for dispatch (excluding weekends).

There is a video of this exhaust on our youtube channel.

Click on the link below to listen to it.

( If there is no link here, there is no video available at the moment )

Fitting Instructions:-

• Simply remove the old exhaust from the vehicle and then fit this replacement system into place.
• You will need to use exhaust assembly paste when fitting this part (not supplied).
• Designed for easy DIY fitment, however if you have any doubts about fitting this part yourself then we recommend professional fitment.

This is a genuine Zaustworx part.

Designed, developed and manufactured by ourselves on our own premises in the UK.

We only use high quality UK sourced 304 grade stainless steel.

We have 25+ years experience in the exhaust industry.

The post Volkswagen Golf 2.0TDi – GTi Style Cat back exhaust (Resonated) appeared first on Zaustworx.

To fit:- Volkswagen Golf Mk7 2.0TDi – 148bhp

Year:- 2012 to 2020

• Fits Mk7 and Mk7.5 models.
• Does not fit 4 motion models.
• Does not fit estate models.

Description:-

The cat back exhaust for Volkswagen Golf Mk7 / and Mk7.5 is made from 2.5″ / 63.5mm mandrel-bent pipework and fits from the DPF backwards. We supply it with a choice of tailpipe options.

Upgrade your Volkswagen Golf Mk7 2.0TDi with this high-quality performance cat-back exhaust system featuring a twin tailpipe design. This exhaust system enhances exhaust flow and improves engine efficiency. Designed for enthusiasts looking to enhance their vehicle’s performance without compromising on quality.

Please Note : 

Performance exhaust systems on diesel vehicles are very quiet compared to petrol models.

So, to achieve a louder exhaust note you may also need to fit a DPF delete.

• Only fits the vehicle listed. It will NOT fit any other vehicles.

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us if you require a fitting price.

You will need to allow 24 to 48 hours for dispatch (Excluding weekends) , as we make each order by hand.

There is a video of this exhaust on our youtube channel.

Click on the link below to listen to it.

https://youtu.be/jY_6U0C6L4A

Fitting Instructions:-

• Remove the old exhaust system from the vehicle and then fit the new replacement system into place
• You will need to use exhaust assembly paste when fitting this part (not supplied).
• Designed for easy DIY fitment, however, if you have any doubts about fitting this part yourself then we recommend professional fitment.

This is a genuine Zaustworx part.

Designed, developed and manufactured by ourselves on our own premises in the UK.

We only use high quality UK sourced 304 grade stainless steel.

We have 25+ years experience in the exhaust industry.

The post Volkswagen Golf Mk7 2.0TDi – Cat back exhaust (Unsilenced) appeared first on Zaustworx.

Introducing our Audi A3 2.0TDI Sportback Rear Silencer Delete, specifically designed for Audi A3 models produced between 2004 and 2013.

To fit:- Audi A3 2.0TDI Sportback 140bhp ( 2wd )

Year:- 2004 to 2013

• Does not fit petrol models.
• Does not fit 170bhp models.
• Does not fit 3 door models.

Description:-

This high-quality silencer delete not only offers a subtle enhancement in exhaust sound but also provides a minor performance boost by eliminating the restrictive factory rear silencer.

By removing this component, you can experience a more liberated exhaust flow, which can contribute to improved engine efficiency and responsiveness.

It is important to note that when this silencer delete is installed as a standalone modification, the change in sound may be minimal.

For those seeking a more pronounced increase in exhaust note, we recommend pairing the silencer delete with additional modifications, such as a resonator delete pipe or a DPF (Diesel Particulate Filter) delete, or even both, if applicable.

Combining these components will amplify the auditory experience and further enhance performance, allowing you to unlock the full potential of your Audi A3 2.0TDI Sportback.

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us if you require a fitting price.

There is a video of our Audi A3 2.0TDI Sportback exhaust on our YouTube channel.

Please click on the link below to listen to it.

( If there is no link here, there is currently no video available )

Fitting Instructions:

To install the rear silencer delete pipes, follow these straightforward steps for a seamless upgrade.

• Remove Standard Rear Silencer. Begin by carefully detaching the existing rear silencer from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust pipe approximately 3.5 inches away from the silencer to ensure a proper fit for the delete pipes.
• Install Delete Pipe. Once the factory exhaust has been cut, take the rear silencer delete pipe and clamp it securely into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post Audi A3 2.0TDI Sportback (8P) Rear Silencer Delete appeared first on Zaustworx.

To fit:- Volkswagen Golf 1.9TDi Mk5 – 89bhp / 104bhp

Year:- 2003 to 2008

• Does not fit 4 motion models.
• Does not fit estate models.
• Requires R32 rear valance ( not supplied )

Please Note :

This part has been designed to be used with the genuine R32 lower bumper section

We can not guarantee correct fitment if used with aftermarket rear valance / diffuser

Supplied with adapter sleeves to allow it to be used on any of the Volkswagen Golf Mk5 models ( except 4 motion )

Description:-

This is our Volkswagen Golf 1.9TDi Mk5 R32 Style Rear Silencer Delete for Volkswagen Golf Mk5 models that were produced from 2003 to 2008.

Please Note : On diesel models, when fitted on its own, this silencer delete makes very little difference to the sound of the vehicle.

If you want an increase in sound, it is best used when combined with a resonator delete or decat pipe (or both).

You will also gain a small performance advantage by removing the restrictive, standard rear silencer.

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price

There are videos of this exhaust on our YouTube channel.

Click on the link below to listen to it.

( If there is no link here, there is no video available )

Hand made to order, so please allow 24 to 48hours for dispatch (excluding weekends).

Fitting Instructions:-

• All you need to do is cut the standard factory oe exhaust where shown in the photos and then clamp this rear silencer delete into position.
• Cut the standard exhaust 13″ away from the silencer as shown in the photos and then clamp this new pipe into position.
• You will need to use exhaust assembly paste when fitting this part (not supplied).
• Designed for easy DIY fitment, however if you have any doubts about fitting this part yourself then we recommend professional fitment.

This is a genuine Zaustworx part.

Designed, developed and manufactured by ourselves on our own premises in the UK.

We only use high quality UK sourced 304 grade stainless steel.

We have 25+ years experience in the exhaust industry.

The post Volkswagen Golf 1.9TDi Mk5 – R32 Style Rear Silencer Delete appeared first on Zaustworx.

To fit:- Volkswagen Golf 2.0TDi (170) Mk5 – 168bhp

Year:- 2003 to 2008

• Does not fit 4 motion models.
• Does not fit estate models.
• Requires R32 rear valance ( not supplied )

Please Note :

This part has been designed to be used with the genuine R32 lower bumper section

We can not guarantee correct fitment if used with aftermarket rear valance / diffuser

Supplied with adapter sleeves to allow it to be used on any of the Volkswagen Golf Mk5 models ( except 4 motion )

Description:-

This is our Volkswagen Golf 2.0TDi (170) Mk5 R32 Style Rear Silencer Delete for Volkswagen Golf Mk5 models that were produced from 2003 to 2008.

Please Note : On diesel models, when fitted on its own, this silencer delete makes very little difference to the sound of the vehicle.

If you want an increase in sound, it is best used when combined with a resonator delete or decat pipe (or both).

You will also gain a small performance advantage by removing the restrictive, standard rear silencer.

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price

There are videos of this exhaust on our YouTube channel.

Click on the link below to listen to it.

( If there is no link here, there is no video available )

Hand made to order, so please allow 24 to 48hours for dispatch (excluding weekends).

Fitting Instructions:-

• All you need to do is cut the standard factory oe exhaust where shown in the photos and then clamp this rear silencer delete into position.
• Cut the standard exhaust 13″ away from the silencer as shown in the photos and then clamp this new pipe into position.
• You will need to use exhaust assembly paste when fitting this part (not supplied).
• Designed for easy DIY fitment, however if you have any doubts about fitting this part yourself then we recommend professional fitment.

This is a genuine Zaustworx part.

Designed, developed and manufactured by ourselves on our own premises in the UK.

We only use high quality UK sourced 304 grade stainless steel.

We have 25+ years experience in the exhaust industry.

The post Volkswagen Golf 2.0TDi (170) Mk5 – R32 Style Rear Silencer Delete appeared first on Zaustworx.

To fit:- Volkswagen Golf 2.0TDi (140) Mk5 – 138bhp

Year:- 2003 to 2008

• Does not fit 4 motion models.
• Does not fit estate models.
• Requires R32 rear valance ( not supplied )

Please Note :

This part has been designed to be used with the genuine R32 lower bumper section

We can not guarantee correct fitment if used with aftermarket rear valance / diffuser

Supplied with adapter sleeves to allow it to be used on any of the Volkswagen Golf Mk5 models ( except 4 motion )

Description:-

This is our Volkswagen Golf 2.0TDi (140) Mk5 R32 Style Rear Silencer Delete for Volkswagen Golf Mk5 models that were produced from 2003 to 2008.

Please Note : On diesel models, when fitted on its own, this silencer delete makes very little difference to the sound of the vehicle.

If you want an increase in sound, it is best used when combined with a resonator delete or decat pipe (or both).

You will also gain a small performance advantage by removing the restrictive, standard rear silencer.

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price

There are videos of this exhaust on our YouTube channel.

Click on the link below to listen to it.

( If there is no link here, there is no video available )

Hand made to order, so please allow 24 to 48hours for dispatch (excluding weekends).

Fitting Instructions:-

• All you need to do is cut the standard factory oe exhaust where shown in the photos and then clamp this rear silencer delete into position.
• Cut the standard exhaust 13″ away from the silencer as shown in the photos and then clamp this new pipe into position.
• You will need to use exhaust assembly paste when fitting this part (not supplied).
• Designed for easy DIY fitment, however if you have any doubts about fitting this part yourself then we recommend professional fitment.

This is a genuine Zaustworx part.

Designed, developed and manufactured by ourselves on our own premises in the UK.

We only use high quality UK sourced 304 grade stainless steel.

We have 25+ years experience in the exhaust industry.

The post Volkswagen Golf 2.0TDi (140) Mk5 – R32 Style Rear Silencer Delete appeared first on Zaustworx.

Volkswagen Golf 2.0GTD Mk7 / Mk7.5 Resonator Delete Pipe

Introducing our premium resonator delete pipe, specifically engineered to fit the Volkswagen Golf 2.0GTD’s original factory exhaust system.

To Fit:- Volkswagen Golf 2.0GTD 180bhp

Year:- 2012 to 2019

Description:-

This precision-designed component allows for straightforward removal of the factory center silencer on the Volkswagen Golf 2.0GTD.

The installation of this resonator delete pipe offers a modest increase in performance due to the improved exhaust flow and the elimination of the restrictive silencer. Customers can expect a subtle enhancement in throttle response and potentially a slight gain in horsepower, all while retaining compatibility with the standard exhaust system.

It is important to note that when this silencer delete is installed as a standalone modification, the change in sound may be minimal.

For those seeking a more pronounced increase in exhaust note, we recommend pairing the silencer delete with additional modifications, such as a resonator delete pipe or a DPF (Diesel Particulate Filter) delete, or even both, if applicable.

Combining these components will amplify the auditory experience and further enhance performance, allowing you to unlock the full potential of your Volkswagen Golf 2.0GTD.

.

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• This kit includes all the required clamps for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a price for fitting this part.

There is a video of our Volkswagen Golf 2.0GTD resonator delete that you can view on our youtube channel.

Click on the link below to listen to it.

( If there is no link here, there is no video available yet )

Fitting Instructions:

To install the resonator delete pipe, follow these straightforward steps for a seamless upgrade.

• Remove Standard Rear Silencer. Begin by carefully detaching the existing resonator from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust pipe approximately 12 inches away from the silencer to ensure a proper fit for the delete pipe.
• Install Delete Pipe. After you cut the factory exhaust, securely clamp the resonator delete pipe into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post Volkswagen Golf 2.0GTD Mk7 / Mk7.5 Resonator Delete Pipe appeared first on Zaustworx.

Upgrade your Audi Q5 2.0TDi’s performance with our premium stainless steel DPF (Diesel Particulate Filter) delete downpipe, engineered specifically for Audi Q5 2.0TDi (8R) models and a wide range of compatible vehicles.

To fit:- Audi Q5 2.0TDi (8R) – 141 BHP/ 148 BHP/ 168 BHP

Year :- 2008 to 2017

• Fits fwd and Quattro models.

Product Overview:

Expertly crafted from top-grade 304 stainless steel, this 2.5″ (63mm) mandrel-bent downpipe is designed to deliver maximum durability, corrosion resistance, and optimal airflow. TIG welded for superior strength and finished with CNC-machined flanges, it ensures a precise, leak-free fit every time.

Performance Benefits:

• Enhanced Power & Torque: Removing the restrictive DPF allows exhaust gases to flow more freely, resulting in significant gains in horsepower and torque across the entire RPM range.

• Improved Throttle Response: Experience sharper throttle feedback and more immediate engine response, making your drive more dynamic and enjoyable.

• Sportier Exhaust Note: Unlock a deeper, more aggressive exhaust tone that accentuates the character of your Audi’s V6 diesel engine.

• Reduced Under-Bonnet Temperatures: Improved gas flow helps lower engine bay temperatures, contributing to better overall efficiency and reliability.

• Increased Drivability: Smoother power delivery and increased performance make your vehicle more responsive both on the road and track.

Unlock your Audi’s true potential with the Zaustworx DPF delete downpipe—engineered for enthusiasts who demand the very best in performance and quality.

Fits the following vehicles:

• Audi A4 2.0 TDi B8 – fwd – 118bhp/134bhp/161bhp – 2008 to 2015
• Audi A4 2.0 TDi B8 – Quattro – 141bhp/168bhp/175bhp/187bhp – 2008 to 2015
• Audi A5 2.0 TDi B8 – 134bhp/141bhp/168bhp/174bhp – 2008 to 201
• Audi A6 2.0 TDi C6 – 134bhp/168bhp – 2008 to 2015
• Audi Q5 2.0 TDi 8R – 141bhp/148bhp/168bhp – 2008 to 2017

Key Features:

• 2.5″ (63mm) bore for optimal exhaust flow

• One Lambda sensor boss

• One temperature sensor boss

• Two pressure sensor bosses

• Direct bolt-on replacement for the factory DPF

• Constructed from high-quality 304-grade stainless steel for long-lasting durability

• Mandrel-bent and TIG welded for strength and precision

• CNC-machined flanges ensure a perfect, secure fit

• Compatible with both OEM and aftermarket cat-back exhaust systems

• Lifetime guarantee for peace of mind

Legal Disclaimer:

Please note: This DPF delete downpipe is intended strictly for off-road and motorsport use only. It will not pass MOT emissions testing and is not legal for use on public roads in the UK or other regions where emissions equipment is mandatory. Removing factory-fitted emissions equipment is illegal in many countries. It is the responsibility of the buyer to ensure compliance with all local laws and regulations. Zaustworx accepts no liability for misuse of this product on public highways.

Installation Information:

• Supplied without fitting instructions.

• Professional installation by a qualified mechanic or experienced individual is strongly recommended to guarantee correct fitment and optimal performance.

Contact Us :-

For inquiries, you can reach us via email or phone, or connect with us through our Facebook page:

https://www.facebook.com/ZaustworxCustomExhausts

Contact us on 01282 414902

Shipping :-

At Zaustworx, we strive to process and dispatch all orders within a timeframe of 24 to 48 hours, excluding weekends and public holidays.

However, please be aware that there may be occasional delays due to various factors, such as the size of your order and our current workload.

Contact us if you’re planning to buy a larger quantity of our exhaust parts.

Our team will be more than happy to provide you with an estimated delivery time tailored to your specific needs.

Satisfaction :-

Rest assured, every product we offer is a genuine Zaustworx part.

Each item is meticulously designed and developed by our skilled team right here in the UK.

We take great pride in using only the highest quality 304 grade stainless steel, ensuring durability and performance in every component.

With over 30 years of experience in custom exhaust systems and fabrication, we are confident that you will find our products to be of exceptional quality.

Thank you for choosing us as your trusted source for exhaust parts!

The post Audi Q5 2.0TDi (8R) – Stainless Steel DPF Delete Downpipe appeared first on Zaustworx.

Upgrade your Audi A6 2.0TDi’s performance with our premium stainless steel DPF (Diesel Particulate Filter) delete downpipe, engineered specifically for Audi A6 2.0TDi C6 models and a wide range of compatible vehicles.

To fit:- Audi A6 2.0TDi C6 – 134 BHP/ 168 BHP

Year :- 2004 to 2011

• Fits fwd and Quattro models.

Product Overview:

Expertly crafted from top-grade 304 stainless steel, this 2.5″ (63mm) mandrel-bent downpipe is designed to deliver maximum durability, corrosion resistance, and optimal airflow. TIG welded for superior strength and finished with CNC-machined flanges, it ensures a precise, leak-free fit every time.

Performance Benefits:

• Enhanced Power & Torque: Removing the restrictive DPF allows exhaust gases to flow more freely, resulting in significant gains in horsepower and torque across the entire RPM range.

• Improved Throttle Response: Experience sharper throttle feedback and more immediate engine response, making your drive more dynamic and enjoyable.

• Sportier Exhaust Note: Unlock a deeper, more aggressive exhaust tone that accentuates the character of your Audi’s V6 diesel engine.

• Reduced Under-Bonnet Temperatures: Improved gas flow helps lower engine bay temperatures, contributing to better overall efficiency and reliability.

• Increased Drivability: Smoother power delivery and increased performance make your vehicle more responsive both on the road and track.

Unlock your Audi’s true potential with the Zaustworx DPF delete downpipe—engineered for enthusiasts who demand the very best in performance and quality.

Fits the following vehicles:

• Audi A4 2.0 TDi B8 – fwd – 118bhp/134bhp/161bhp – 2008 to 2015
• Audi A4 2.0 TDi B8 – Quattro – 141bhp/168bhp/175bhp/187bhp – 2008 to 2015
• Audi A5 2.0 TDi B8 – 134bhp/141bhp/168bhp/174bhp – 2008 to 201
• Audi A6 2.0 TDi C6 – 134bhp/168bhp – 2008 to 2015
• Audi Q5 2.0 TDi 8R – 141bhp/148bhp/168bhp – 2008 to 2017

Key Features:

• 2.5″ (63mm) bore for optimal exhaust flow

• One Lambda sensor boss

• One temperature sensor boss

• Two pressure sensor bosses

• Direct bolt-on replacement for the factory DPF

• Constructed from high-quality 304-grade stainless steel for long-lasting durability

• Mandrel-bent and TIG welded for strength and precision

• CNC-machined flanges ensure a perfect, secure fit

• Compatible with both OEM and aftermarket cat-back exhaust systems

• Lifetime guarantee for peace of mind

Legal Disclaimer:

Please note: This DPF delete downpipe is intended strictly for off-road and motorsport use only. It will not pass MOT emissions testing and is not legal for use on public roads in the UK or other regions where emissions equipment is mandatory. Removing factory-fitted emissions equipment is illegal in many countries. It is the responsibility of the buyer to ensure compliance with all local laws and regulations. Zaustworx accepts no liability for misuse of this product on public highways.

Installation Information:

• Supplied without fitting instructions.

• Professional installation by a qualified mechanic or experienced individual is strongly recommended to guarantee correct fitment and optimal performance.

Contact Us :-

For inquiries, you can reach us via email or phone, or connect with us through our Facebook page:

https://www.facebook.com/ZaustworxCustomExhausts

Contact us on 01282 414902

Shipping :-

At Zaustworx, we strive to process and dispatch all orders within a timeframe of 24 to 48 hours, excluding weekends and public holidays.

However, please be aware that there may be occasional delays due to various factors, such as the size of your order and our current workload.

Contact us if you’re planning to buy a larger quantity of our exhaust parts.

Our team will be more than happy to provide you with an estimated delivery time tailored to your specific needs.

Satisfaction :-

Rest assured, every product we offer is a genuine Zaustworx part.

Each item is meticulously designed and developed by our skilled team right here in the UK.

We take great pride in using only the highest quality 304 grade stainless steel, ensuring durability and performance in every component.

With over 30 years of experience in custom exhaust systems and fabrication, we are confident that you will find our products to be of exceptional quality.

Thank you for choosing us as your trusted source for exhaust parts!

The post Audi A6 2.0TDi C6 – Stainless Steel DPF Delete Downpipe appeared first on Zaustworx.