BMW 125i M Sport E82/E88 Rear Silencer Delete

Introducing our BMW 125i M Sport E82/E88 Rear Silencer Delete, specifically designed for BMW 125i models produced between 2007 and 2013.

To Fit: BMW 125i M Sport E82/E88 – 215bhp

Year: 2007 to 2013

• Fits 125i E82/E88 models only.
• Does not fit diesel models.

Description:-

This rear silencer delete is the perfect solution for enthusiasts seeking to enhance the auditory presence of their vehicle without the need to invest in a costly aftermarket exhaust system. By removing the factory rear silencer, this component delivers a more pronounced and sporty exhaust note, transforming your driving experience while retaining the original system’s fit and integrity.

Designed and manufactured in-house to the highest standards, our rear silencer delete is specifically developed to accentuate the distinctive sound characteristics of the BMW 125i M Sport E82/E88. The result is a deeper, more engaging exhaust tone that complements the car’s performance-oriented nature, ensuring a satisfying and dynamic auditory experience.

In addition to the noticeable sound improvement, the installation of this silencer delete may also yield a modest performance enhancement, contributing to a more responsive driving feel.

Upgrade your BMW 125i M Sport E82/E88 with confidence – experience superior sound and subtle performance gains with our expertly crafted rear silencer delete.

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price.

There is a video of our BMW 125i M Sport E82/E88 rear silencer delete on our YouTube channel.

Please click on the link below to listen to it.

https://youtu.be/SEQ-O8Fy-_M

Fitting Instructions:

To install the rear silencer delete pipe, follow these straightforward steps for a seamless upgrade.

• Remove Standard Rear Silencer. Begin by carefully detaching the existing rear silencer from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust pipe approximately 8 inches away from the rear of the silencer to ensure a proper fit for the delete pipe.
• Install Delete Pipe. Once the factory exhaust has been cut, take the rear silencer delete pipe and clamp it securely into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post BMW 125i M Sport E82/E88 Rear Silencer Delete appeared first on Zaustworx.

To fit:- BMW 125i F20/F21 N20 – 215 BHP

Year :- 2012 to 2015

This is our 4″ stainless steel decat downpipe for the BMW 125i F20/F21 N20

• Does not fit models with GPF / PPF / OPF unless it has been coded out and can be removed.

Will also fit the following vehicles.

• 125i F20/F21 N20 215BHP- 2012-2015
• 220i F22/F23 N20 181BHP- 2014-2016
• 228i F22/F23 N20 241BHP 2014-2016
• 320i F30/F31/F34 N20 181BHP 2012-2015
• 328i F30/F31/F34 N20 241BHP- 2012-2015
• 420i F32/F33 N20 181BHP- 2014-2016
• 428i F32/F33 N20 241BHP- 2013-2016
• 528i F10 N20 241BHP- 2012-2016
• Z4 S DRIVE 28i E89 N20 241BHP- 2011-2016
• X1 S DRIVE 20i E84 N20 181BHP- 2011-2015
• X1 S DRIVE 28i E84 N20 241BHP- 2011-2015
• X3 S DRIVE 20i F25 N20 181BHP- 2011-2017
• X3 X DRIVE 20i F25 N20 181BHP- 2011-2017
• X3 X DRIVE 28i F25 N20 242BHP- 2012-2017
• X4 X DRIVE 20i F26 N20 181 BHP- 2014-2018
• X4 X DRIVE 28i F26 N20 241BHP- 2014-2018
• X5 X DRIVE 40e F15 N20 308BHP- 2015-2018

• Designed for off-road / track use only.

Fitting a decat downpipe may activate an EML warning light, so we recommend that the ecu will need to be coded when fitting this downpipe.

We recommend fitting a new turbo gasket when fitting this part.

Specification :-

This 4″ (101mm ) decat downpipe is made from the highest quality 304 grade mandrel bent stainless steel.

Will give noticeable power gains and a more aggressive exhaust note.

• 4″ bore ( 101mm ) including flexi
• Two Lambda sensor bung.
• Designed to be a direct bolt on replacement for the oem catalytic converter.
• Manufactured from high quality 304 grade stainless steel.
• Mandrel bent and tig welded.
• CNC Machined flanges for an accurate fit.
• High quality flexi joint.
• You will gain an improvement in throttle response.
• Improves power and torque.
• Increased performance and driveability.
• Suitable for aftermarket and oem cat back exhausts.
• Lifetime Guarantee.

Fitting a decat downpipe will give an increase in power and torque throughtout the enitre rpm range which will give an improvement in performance and driveability.

Improves throttle response and reduces underbonnet temperatures.

Sold for off road and motorsport use only and will not pass an MOT emissions test.

Legal information :

It is illegal in the UK to remove any of the original factory fitted emissions equipment fitted to a vehicle.

It is the customers responsibility to ensure that they comply with the relevant rules, regulations and laws in their own country.

Zaustworx accepts no responsibility for the use of this part on the public highway.

Fitting :

Does not come with fitting instructions.

We recommend that this part is fitted by a competent person or qualified mechanic to ensure correct fitment.

Contact us on our facebook page if you have any questions about this product

https://www.facebook.com/ZaustworxCustomExhausts/

Or you can contact us on 01282 414902

The post BMW 125i F20/F21 N20 – Stainless Steel Decat Downpipe appeared first on Zaustworx.

To fit:- BMW 125i F20/F21 B48 – 221 BHP

Year :- 2016 to 2019

This is our 4″ stainless steel decat downpipe for the BMW 125i F20/F21 B48

• Does not fit models with GPF / PPF / OPF unless it has been coded out and can be removed.

Will also fit the following vehicles.

• 120i F20/F21 B48 181BHP- 2016-2019
• 125i F20 / F21 B48 221bhp – 2016-2019
• 220i F22 / F23 B48 181bhp – 2016-2021
• 230i F22 / F23 B48 248bhp – 2016-2021
• 330i/ 330ix F30/F31/F34GT B48 248BHP- 2015-2019
• 330E F30/F31 B48 248 BHP- 2015-2018
• 420i/ 420ix F32/F33/F36 B48 181BHP 2016-2019
• 430i/ 430ix F32/ F33/ F36 B48- 248 bhp- 2016-2019
• 730i/ 730Li G11/G12 B48 255 BHP- 2016+
• 740e/ 740Le G11/G12 B48 322BHP- 2016+

• Designed for off-road / track use only.

Fitting a decat downpipe may activate an EML warning light, so we recommend that the ecu will need to be coded when fitting this downpipe.

We recommend fitting a new turbo gasket when fitting this part.

This 4″ (101mm ) decat downpipe is made from the highest quality 304 grade mandrel bent stainless steel.

Will give noticeable power gains and a more aggressive exhaust note.

• 4″ bore ( 101mm ) including flexi
• Two Lambda sensor bung.
• Designed to be a direct bolt on replacement for the oem catalytic converter.
• Manufactured from high quality 304 grade stainless steel.
• Mandrel bent and tig welded.
• CNC Machined flanges for an accurate fit.
• High quality flexi joint.
• You will gain an improvement in throttle response.
• Improves power and torque.
• Increased performance and driveability.
• Suitable for aftermarket and oem cat back exhausts.
• Lifetime Guarantee.

Fitting a decat downpipe will give an increase in power and torque throughtout the enitre rpm range which will give an improvement in performance and driveability.

Improves throttle response and reduces underbonnet temperatures.

Sold for off road and motorsport use only and will not pass an MOT emissions test.

Legal information :

It is illegal in the UK to remove any of the original factory fitted emissions equipment fitted to a vehicle.

It is the customers responsibility to ensure that they comply with the relevant rules, regulations and laws in their own country.

Zaustworx accepts no responsibility for the use of this part on the public highway.

Fitting :

Does not come with fitting instructions.

We recommend that this part is fitted by a competent person or qualified mechanic to ensure correct fitment.

Contact us on our facebook page if you have any questions about this product

https://www.facebook.com/ZaustworxCustomExhausts/

Or you can contact us on 01282 414902

The post BMW 125i F20/F21 B48 – Stainless Steel Decat Downpipe appeared first on Zaustworx.

To Fit : BMW B48 125i – F20/F21

Year : 2016 to 2019

This flange can be used for the following applications.

• Decat pipe.
• Sports cat.
• Custom exhaust system.

This is the correct flange size to fit the turbocharger on the BMW B48 125i – F20/F21 models.

We use these flanges on our own mail order products, so you can be sure you are getting a quality product that fits correctly.

Ideal for use in manufacturing custom exhausts or repairing damaged exhaust systems.

• 304 grade stainless steel.
• CNC machined for accuracy.

At Zaustworx we have a large range of universal exhaust flanges and an even larger range of car specific exhaust flanges that are ideal for use in making custom exhaust systems, downpipes, decat pipes, dpf deletes and many other applications.

We are constantly adding to our large range of flanges that we have available.

Have a look through our range and if you can not find the flange to suit your requirements, contact us and we may be able to help.

Contact us by email or phone

or message us on our facebook page https://www.facebook.com/ZaustworxCustomExhausts

Other fabrication parts

We sell everything needed for you to build your own exhaust system.

Click on the link below to see what other parts we have available.

https://www.zaustworx.co.uk/product-category/fabrication-parts/

Zaustworx are one of the largest manufacturers of stainless steel exhaust silencers in the UK and have been manufacturing silencers for trade customers and race teams for over 20 years.

All materials and components are sourced from UK based manufacturers.

With over 25 years of custom exhaust and fabrication experience you can rest assured that you are in the right place as the quality of our products are second to none.

Shipping, Returns & FAQ’s

We always try to dispatch orders within 48 hours from receiving the order ( except weekends and bank holidays )

You may however, experience delays depending on the quantity of your order and our current workload.

If you would like to order a large quantity of our exhaust fabrication parts, please contact us for an estimated delivery time.

Cant find what you are looking for ?

Please contact us on our facebook page to discuss your needs.

https://www.facebook.com/ZaustworxCustomExhausts

The post BMW B48 125i – F20/F21 Turbo V Band Flange appeared first on Zaustworx.

This Turbo V Band exhaust flange is specifically designed to fit the turbocharger on BMW N20 125i – F20/F21 models.

Precision-engineered to ensure a perfect fit, it is compatible with custom exhaust fabrication projects for this vehicle.

To Fit : BMW N20 125i – F20/F21 – 218bhp

Year : 2012 to 2015

This flange can be used for the following applications.

• Decat pipe.
• Sports cat.
• Custom exhaust system.

This is the correct flange size to fit the turbocharger on the BMW N20 125i – F20/F21 models.

We use these flanges on our own mail order products, so you can be sure you are getting a quality product that fits correctly.

Ideal for use in manufacturing custom exhausts or repairing damaged exhaust systems.

• 304 grade stainless steel.
• CNC machined for accuracy.

At Zaustworx we have a large range of universal exhaust flanges and an even larger range of car specific exhaust flanges that are ideal for use in making custom exhaust systems, downpipes, decat pipes, dpf deletes and many other applications.

We are constantly adding to our large range of flanges that we have available.

Have a look through our range and if you can not find the flange to suit your requirements, contact us and we may be able to help.

Contact us by email or phone

or message us on our facebook page https://www.facebook.com/ZaustworxCustomExhausts

Other fabrication parts

We sell everything needed for you to build your own exhaust system.

Click on the link below to see what other parts we have available.

https://www.zaustworx.co.uk/product-category/fabrication-parts/

Zaustworx are one of the largest manufacturers of stainless steel exhaust silencers in the UK and have been manufacturing silencers for trade customers and race teams for over 20 years.

All materials and components are sourced from UK based manufacturers.

With over 25 years of custom exhaust and fabrication experience you can rest assured that you are in the right place as the quality of our products are second to none.

Shipping, Returns & FAQ’s

We always try to dispatch orders within 48 hours from receiving the order ( except weekends and bank holidays )

You may however, experience delays depending on the quantity of your order and our current workload.

If you would like to order a large quantity of our exhaust fabrication parts, please contact us for an estimated delivery time.

Cant find what you are looking for ?

Please contact us on our facebook page to discuss your needs.

https://www.facebook.com/ZaustworxCustomExhausts

The post BMW N20 125i – F20/F21 Turbo V Band Exhaust Flange appeared first on Zaustworx.