CP7 Twin 3″ Slash Cut Bevelled Tailpipe – L/H

• 3″ Round ( 76mm ) x 2
• Slash cut with bevelled finish
• Staggered ( Will fit left hand side)
• 57mm inlet
• Overall length 245mm
• 304 grade stainless

These discontinued tailpipes are not available for sale in our current stock range.

We are offering these at vastly reduced prices in our clearance section.

Limited stock, once they are gone, they are gone.

Please note :

These tailpipes are being offered at a reduced rate and are therefore non returnable.

These tailpipes are weld on and not suitable for clamp on use.

Our tailpipe range are all made to the very highest standards and manufactured from the highest quality materials.

• All our stainless steel tailpipes are all top quality 304 grade stainless steel.
• Our carbon fiber tailpipes are all made using genuine carbon fiber.

We have a wide range of tailpipes available and we are constantly adding new styles.

If you dont see what you are looking for, please contact us and we may be able to help.

Anyone custom-making an exhaust system can find a large range of suitable exhaust fabrication parts in our online shop, in addition to what we offer here.

If you can not find what you are looking for, please email us and we may be able to help.

Or contact us on our facebook page http://www.facebook.com/ZaustworxCustomExhausts/

This is a genuine Zaustworx part.

Designed and developed by ourselves and manufactured to our own specific requirements.

We only use high quality 304 grade stainless steel in the manufacture of our tailpipes.

You can buy with confidence when purchasing exhaust products from Zaustworx, as we have over 25 years of experience in the industry.

The post CP7 Twin 3″ Slash Cut Bevelled Tailpipe – L/H appeared first on Zaustworx.

CP6 Twin 3″ Slash Cut Inrolled Tailpipe – R/H

• 3″ Round ( 76mm ) x 2
• Slash cut with Inrolled finish
• Staggered ( Will fit right hand side)
• 57mm inlet
• Overall length 230mm
• 304 grade stainless

These discontinued tailpipes are not available for sale in our current stock range.

We are offering these at vastly reduced prices in our clearance section.

Limited stock, once they are gone, they are gone.

Please note :

These tailpipes are being offered at a reduced rate and are therefore non returnable.

These tailpipes are weld on and not suitable for clamp on use.

Our tailpipe range are all made to the very highest standards and manufactured from the highest quality materials.

• All our stainless steel tailpipes are all top quality 304 grade stainless steel.
• Our carbon fiber tailpipes are all made using genuine carbon fiber.

We have a wide range of tailpipes available and we are constantly adding new styles.

If you dont see what you are looking for, please contact us and we may be able to help.

Anyone custom-making an exhaust system can find a large range of suitable exhaust fabrication parts in our online shop, in addition to what we offer here.

If you can not find what you are looking for, please email us and we may be able to help.

Or contact us on our facebook page http://www.facebook.com/ZaustworxCustomExhausts/

This is a genuine Zaustworx part.

Designed and developed by ourselves and manufactured to our own specific requirements.

We only use high quality 304 grade stainless steel in the manufacture of our tailpipes.

You can buy with confidence when purchasing exhaust products from Zaustworx, as we have over 25 years of experience in the industry.

The post CP6 Twin 3″ Slash Cut Inrolled Tailpipe – R/H appeared first on Zaustworx.

CP5 Twin 3″ Slash-Cut Inrolled Tailpipe – L/H

• 3″ Round ( 76mm ) x 2
• Slash cut with Inrolled finish
• Staggered ( Will fit left hand side)
• 57mm inlet
• Overall length 230mm
• 304 grade stainless

These discontinued tailpipes are not available for sale in our current stock range.

We are offering these at vastly reduced prices in our clearance section.

Limited stock, once they are gone, they are gone.

Please note :

These tailpipes are being offered at a reduced rate and are therefore non returnable.

These tailpipes are weld on and not suitable for clamp on use.

Our tailpipe range are all made to the very highest standards and manufactured from the highest quality materials.

• All our stainless steel tailpipes are all top quality 304 grade stainless steel.
• Our carbon fiber tailpipes are all made using genuine carbon fiber.

We have a wide range of tailpipes available and we are constantly adding new styles.

If you dont see what you are looking for, please contact us and we may be able to help.

Anyone custom-making an exhaust system can find a large range of suitable exhaust fabrication parts in our online shop, in addition to what we offer here.

If you can not find what you are looking for, please email us and we may be able to help.

Or contact us on our facebook page http://www.facebook.com/ZaustworxCustomExhausts/

This is a genuine Zaustworx part.

Designed and developed by ourselves and manufactured to our own specific requirements.

We only use high quality 304 grade stainless steel in the manufacture of our tailpipes.

You can buy with confidence when purchasing exhaust products from Zaustworx, as we have over 25 years of experience in the industry.

The post CP5 Twin 3″ Slash-Cut Inrolled Tailpipe – L/H appeared first on Zaustworx.

CP4 Twin 4″ x 2″ Oblong tailpipe

• 3″ Round ( 76mm ) x 2
• Oblong tailpipe
• 57mm inlet
• Overall length 250mm
• 304 grade stainless

These discontinued tailpipes are not available for sale in our current stock range.

We are offering these at vastly reduced prices in our clearance section.

Limited stock, once they are gone, they are gone.

Please note :

These tailpipes are being offered at a reduced rate and are therefore non returnable.

These tailpipes are weld on and not suitable for clamp on use.

Our tailpipe range are all made to the very highest standards and manufactured from the highest quality materials.

• All our stainless steel tailpipes are all top quality 304 grade stainless steel.
• Our carbon fiber tailpipes are all made using genuine carbon fiber.

We have a wide range of tailpipes available and we are constantly adding new styles.

If you dont see what you are looking for, please contact us and we may be able to help.

Anyone custom-making an exhaust system can find a large range of suitable exhaust fabrication parts in our online shop, in addition to what we offer here.

If you can not find what you are looking for, please email us and we may be able to help.

Or contact us on our facebook page http://www.facebook.com/ZaustworxCustomExhausts/

This is a genuine Zaustworx part.

Designed and developed by ourselves and manufactured to our own specific requirements.

We only use high quality 304 grade stainless steel in the manufacture of our tailpipes.

You can buy with confidence when purchasing exhaust products from Zaustworx, as we have over 25 years of experience in the industry.

The post CP4 Twin 4″ x 2″ Oblong tailpipe appeared first on Zaustworx.

CP3 Twin 3″ Straight-Cut Inrolled Tailpipe – Staggered (Black)

• 3″ Round ( 76mm ) x 2
• Straight cut with Inrolled finish
• Staggered ( Will fit left hand side or right hand side )
• 60mm inlet
• Overall length 240mm
• 304 grade stainless
• Black painted

These tailpipes should have been powder coated, but the manufacturer that made them for us painted them instead of powder coating them.

These discontinued tailpipes are not available for sale in our current stock range.

We are offering these at vastly reduced prices only in our clearance section.

Limited stock, once they are gone, they are gone.

Please note :

These tailpipes are being offered at a reduced rate and are therefore non returnable.

The inlets on these tailpipes are not notched and will need notching if being used as clamp on tips.

( Please note this is not a service we can offer )

Our tailpipe range are all made to the very highest standards and manufactured from the highest quality materials.

• All our stainless steel tailpipes are all top quality 304 grade stainless steel.
• Our carbon fiber tailpipes are all made using genuine carbon fiber.

We have a wide range of tailpipes available and we are constantly adding new styles.

If you dont see what you are looking for, please contact us and we may be able to help.

Anyone custom-making an exhaust system can find a large range of suitable exhaust fabrication parts in our online shop, in addition to what we offer here.

If you can not find what you are looking for, please email us and we may be able to help.

Or contact us on our facebook page http://www.facebook.com/ZaustworxCustomExhausts/

This is a genuine Zaustworx part.

Designed and developed by ourselves and manufactured to our own specific requirements.

We only use high quality 304 grade stainless steel in the manufacture of our tailpipes.

You can buy with confidence when purchasing exhaust products from Zaustworx, as we have over 25 years of experience in the industry.

The post CP3 Twin 3″ Straight-Cut Inrolled Tailpipe – Staggered (Black) appeared first on Zaustworx.

CP2 Twin 3″ Straight-Cut Bevelled Tailpipe – Staggered (Black)

• 3″ Round ( 76mm ) x 2
• Straight cut with bevelled finish
• Staggered ( Will fit left hand side or right hand side )
• 60mm inlet
• Overall length 240mm
• 304 grade stainless
• Black painted

These tailpipes should have been powder coated, but the manufacturer that made them for us painted them instead of powder coating them.

These discontinued tailpipes are not available for sale in our current stock range.

We are offering these at vastly reduced prices only in our clearance section.

Limited stock, once they are gone, they are gone.

Please note :

These tailpipes are being offered at a reduced rate and are therefore non returnable.

The inlets on these tailpipes are not notched and will need notching if being used as clamp on tips.

( Please note this is not a service we can offer )

Our tailpipe range are all made to the very highest standards and manufactured from the highest quality materials.

• All our stainless steel tailpipes are all top quality 304 grade stainless steel.
• Our carbon fiber tailpipes are all made using genuine carbon fiber.

We have a wide range of tailpipes available and we are constantly adding new styles.

If you dont see what you are looking for, please contact us and we may be able to help.

Anyone custom-making an exhaust system can find a large range of suitable exhaust fabrication parts in our online shop, in addition to what we offer here.

If you can not find what you are looking for, please email us and we may be able to help.

Or contact us on our facebook page http://www.facebook.com/ZaustworxCustomExhausts/

This is a genuine Zaustworx part.

Designed and developed by ourselves and manufactured to our own specific requirements.

We only use high quality 304 grade stainless steel in the manufacture of our tailpipes.

You can buy with confidence when purchasing exhaust products from Zaustworx, as we have over 25 years of experience in the industry.

The post CP2 Twin 3″ Straight-Cut Bevelled Tailpipe – Staggered (Black) appeared first on Zaustworx.

CP1 Twin 3″ Slash-Cut Bevelled Tailpipe – L/H (Black)

• 3″ Round ( 76mm ) x 2
• Slash cut with bevelled finish
• L/H Staggered ( Looking at rear of vehicle )
• 60mm inlet
• Overall length 240mm
• 304 grade stainless
• Black painted

These tailpipes should have been powder coated, but the manufacturer that made them for us painted them instead of powder coating them.

These discontinued tailpipes are not available for sale in our current stock range.

We are offering these at vastly reduced prices only in our clearance section.

Limited stock, once they are gone, they are gone.

Please note :

These tailpipes are being offered at a reduced rate and are therefore non returnable.

The inlets on these tailpipes are not notched and will need notching if being used as clamp on tips.

( Please note this is not a service we can offer )

Our tailpipe range are all made to the very highest standards and manufactured from the highest quality materials.

• All our stainless steel tailpipes are all top quality 304 grade stainless steel.
• Our carbon fiber tailpipes are all made using genuine carbon fiber.

We have a wide range of tailpipes available and we are constantly adding new styles.

If you dont see what you are looking for, please contact us and we may be able to help.

Anyone custom-making an exhaust system can find a large range of suitable exhaust fabrication parts in our online shop, in addition to what we offer here.

If you can not find what you are looking for, please email us and we may be able to help.

Or contact us on our facebook page http://www.facebook.com/ZaustworxCustomExhausts/

This is a genuine Zaustworx part.

Designed and developed by ourselves and manufactured to our own specific requirements.

We only use high quality 304 grade stainless steel in the manufacture of our tailpipes.

You can buy with confidence when purchasing exhaust products from Zaustworx, as we have over 25 years of experience in the industry.

The post CP1 Twin 3″ Slash-Cut Bevelled Tailpipe – L/H (Black) appeared first on Zaustworx.