Cupra Leon 245 Mk4 Resonator Delete Pipe

Introducing our premium resonator delete pipe, specifically engineered to fit the Cupra Leon 245 Mk4’s original factory exhaust system.

To Fit:- Cupra Leon 245 Mk4 2wd Hatch

Year:- 2021+

Description:-

This mid silencer delete pipe is expertly crafted to provide an enhanced auditory experience, delivering a sportier exhaust note without the need to invest in a costly aftermarket exhaust system.
By opting for this resonator delete, you can enjoy a more aggressive sound profile that perfectly complements the performance characteristics of your vehicle.

In addition to the auditory benefits, this modification also offers a slight performance boost by eliminating the restrictive factory exhaust silencer. This allows for improved exhaust flow, which can contribute to a more responsive driving experience.
Our design facilitates the straightforward removal of the centre silencer from your Cupra Leon 245 Mk4’s standard exhaust system, making installation a hassle-free process.

This upgrade not only elevates the sound and performance of your car but also enhances your overall driving enjoyment.

Embrace the thrill of driving with a more dynamic and engaging exhaust tone, all while maintaining the integrity of your vehicle’s original exhaust setup.

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• This kit includes all the required clamps for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a price for fitting this part.

There is a video of our Cupra Leon 245 Mk4 resonator delete that you can view on our youtube channel.

Click on the link below to listen to it.

https://youtu.be/am8RPBYqzTc

Fitting Instructions:

To install the resonator delete pipe, follow these straightforward steps for a seamless upgrade.

• Remove Standard Resonator. Begin by carefully detaching the existing resonator from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust pipe approximately 13.5 inches away from the silencer to ensure a proper fit for the delete pipe.
• Install Delete Pipe. Once the factory exhaust has been cut, take the resonator delete pipe and clamp it securely into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipe, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new resonator delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post Cupra Leon 245 Mk4 Resonator Delete Pipe appeared first on Zaustworx.

Seat Ateca 2.0TSi 190 4Drive Resonator Delete Pipe

Introducing our premium resonator delete pipe, specifically engineered to fit the Seat Ateca 2.0TSi 190 4Drive’s original factory exhaust system.

To Fit:- Seat Ateca 2.0TSi 190 4Drive – 190bhp

Year:- 2017 to present day (including GPF models)

• Does also fit later GPF equipped models.
• Choose from die bent or mandrel bent versions.

Description:-

This mid silencer delete pipe is expertly crafted to provide an enhanced auditory experience, delivering a sportier exhaust note without the need to invest in a costly aftermarket exhaust system.

By opting for this resonator delete, you can enjoy a more aggressive sound profile that perfectly complements the performance characteristics of your vehicle.

In addition to the auditory benefits, this modification also offers a slight performance boost by eliminating the restrictive factory exhaust silencer. This allows for improved exhaust flow, which can contribute to a more responsive driving experience.
Our design facilitates the straightforward removal of the centre silencer from your Seat Ateca 2.0TSi 190 4Drive’s standard exhaust system, making installation a hassle-free process.

This upgrade not only elevates the sound and performance of your car but also enhances your overall driving enjoyment.

For your customization needs, we offer this product in both die bent and mandrel bent versions, allowing you to choose the option that best suits your preferences.

Embrace the thrill of driving with a more dynamic and engaging exhaust tone, all while maintaining the integrity of your vehicle’s original exhaust setup.

• Important information :-

  • Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
  • Please check your exhaust carefully for compatibility before purchasing.
  • Only fits the vehicle listed. It will NOT fit any other vehicles.

   

   

  • Fully reversible.
  • Clamp on fitment, so no welding required.
  • This kit includes all the required clamps for fitting.
  • Premium quality 304 grade stainless steel.
  • Lifetime guarantee.
  • Fitting is available if required.
  • Contact us on 01282 414902 if you require a price for fitting this part.

There are videos of our Seat Ateca 2.0TSi 190 4Drive’s exhaust that you can view on our youtube channel.

Click on the links below to view them.

If there is no link here, there is no video available yet.

Fitting Instructions:

To install the Seat Ateca 2.0TSi 190 4Drive resonator delete pipe, follow these straightforward steps for a seamless upgrade.

• Remove Standard Resonator. Begin by carefully detaching the existing resonator from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Look for three distinct dots positioned after the resonator, as illustrated in the accompanying photos. You should cut the exhaust pipe at the middle dot to ensure proper alignment and fit.

• Install Delete Pipe. Once the factory exhaust has been cut, take the resonator delete pipe and clamp it securely into position.

• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.

• Use Exhaust Assembly Paste. When fitting the delete pipe, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.

• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new resonator delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post Seat Ateca 2.0TSi 190 4Drive Resonator Delete Pipe appeared first on Zaustworx.

To fit:- Seat Leon Cupra 300

Year:- 2017 to 2020

• Does not fit estate models.
• Resonated ( Centre silencer, no rear silencer )

Description:-

The cat back exhaust for Seat Leon Cupra 300 is made from 2.5″ / 63.5mm mandrel-bent pipework and fits from the Catalytic converter, backwards.

We supply it with a choice of tailpipe options.

Upgrade your Seat Leon Cupra 300 with this high-quality performance cat-back exhaust system featuring a twin tailpipe design. This exhaust system enhances exhaust flow and improves engine efficiency, engineered to deliver a sportier sound and style. Designed for enthusiasts looking to enhance their vehicle’s performance without compromising on quality.

This 63.5mm mandrel-bent exhaust system will handle up to 480bhp.

• Only fits the vehicle listed. It will NOT fit any other vehicles.

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us if you require a fitting price.

You will need to allow 24 to 48 hours for dispatch (Excluding weekends) , as we make each order by hand.

There is a video of this exhaust on our youtube channel.

Click on the link below to listen to it.

Fitting Instructions:-

• Remove the old exhaust system from the vehicle and then fit the new replacement system into place
• You will need to use exhaust assembly paste when fitting this part (not supplied).
• Designed for easy DIY fitment, however, if you have any doubts about fitting this part yourself then we recommend professional fitment.

This is a genuine Zaustworx part.

Designed, developed and manufactured by ourselves on our own premises in the UK.

We only use high quality UK sourced 304 grade stainless steel.

We have 25+ years experience in the exhaust industry.

The post Seat Leon Cupra 300 – Cat back exhaust (Resonated) appeared first on Zaustworx.

To fit:- Seat Leon Cupra 300

Year:- 2017 to 2020

• Does not fit estate models.
• Unsilenced ( No silencers )
• Warning – Very loud on non GPF models.

Description:-

The cat back exhaust for Seat Leon Cupra 300 is made from 2.5″ / 63.5mm mandrel-bent pipework and fits from the Catalytic converter, backwards.

We supply it with a choice of tailpipe options.

Upgrade your Seat Leon Cupra 300 with this high-quality performance cat-back exhaust system featuring a twin tailpipe design. This exhaust system enhances exhaust flow and improves engine efficiency, engineered to deliver a sportier sound and style. Designed for enthusiasts looking to enhance their vehicle’s performance without compromising on quality.

This 63.5mm mandrel-bent exhaust system will handle up to 480bhp.

• Only fits the vehicle listed. It will NOT fit any other vehicles.

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us if you require a fitting price.

You will need to allow 24 to 48 hours for dispatch (Excluding weekends) , as we make each order by hand.

There is a video of this exhaust on our youtube channel.

Click on the link below to listen to it.

Fitting Instructions:-

• Remove the old exhaust system from the vehicle and then fit the new replacement system into place
• You will need to use exhaust assembly paste when fitting this part (not supplied).
• Designed for easy DIY fitment, however, if you have any doubts about fitting this part yourself then we recommend professional fitment.

This is a genuine Zaustworx part.

Designed, developed and manufactured by ourselves on our own premises in the UK.

We only use high quality UK sourced 304 grade stainless steel.

We have 25+ years experience in the exhaust industry.

The post Seat Leon Cupra 300 – Cat back exhaust (Unsilenced) appeared first on Zaustworx.

To fit:- Seat Leon Cupra 290

Year:- 2015 to 2020

• Does not fit estate models.
• Resonated ( Centre silencer, no rear silencer )

Description:-

The cat back exhaust for Seat Leon Cupra 290 is made from 2.5″ / 63.5mm mandrel-bent pipework and fits from the Catalytic converter, backwards.

We supply it with a choice of tailpipe options.

Upgrade your Seat Leon Cupra 290 with this high-quality performance cat-back exhaust system featuring a twin tailpipe design. This exhaust system enhances exhaust flow and improves engine efficiency, engineered to deliver a sportier sound and style. Designed for enthusiasts looking to enhance their vehicle’s performance without compromising on quality.

This 63.5mm mandrel-bent exhaust system will handle up to 480bhp.

• Only fits the vehicle listed. It will NOT fit any other vehicles.

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us if you require a fitting price.

You will need to allow 24 to 48 hours for dispatch (Excluding weekends) , as we make each order by hand.

There is a video of this exhaust on our youtube channel.

Click on the link below to listen to it.

Fitting Instructions:-

• Remove the old exhaust system from the vehicle and then fit the new replacement system into place
• You will need to use exhaust assembly paste when fitting this part (not supplied).
• Designed for easy DIY fitment, however, if you have any doubts about fitting this part yourself then we recommend professional fitment.

This is a genuine Zaustworx part.

Designed, developed and manufactured by ourselves on our own premises in the UK.

We only use high quality UK sourced 304 grade stainless steel.

We have 25+ years experience in the exhaust industry.

The post Seat Leon Cupra 290 – Cat back exhaust (Resonated) appeared first on Zaustworx.

To fit:- Seat Leon Cupra 290

Year:- 2015 to 2020

• Does not fit estate models.
• Unsilenced ( No silencers )
• Warning – Very loud on non GPF models.

Description:-

The cat back exhaust for Seat Leon Cupra 290 is made from 2.5″ / 63.5mm mandrel-bent pipework and fits from the Catalytic converter, backwards.

We supply it with a choice of tailpipe options.

Upgrade your Seat Leon Cupra 290 with this high-quality performance cat-back exhaust system featuring a twin tailpipe design. This exhaust system enhances exhaust flow and improves engine efficiency, engineered to deliver a sportier sound and style. Designed for enthusiasts looking to enhance their vehicle’s performance without compromising on quality.

This 63.5mm mandrel-bent exhaust system will handle up to 480bhp.

• Only fits the vehicle listed. It will NOT fit any other vehicles.

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us if you require a fitting price.

You will need to allow 24 to 48 hours for dispatch (Excluding weekends) , as we make each order by hand.

There is a video of this exhaust on our youtube channel.

Click on the link below to listen to it.

Fitting Instructions:-

• Remove the old exhaust system from the vehicle and then fit the new replacement system into place
• You will need to use exhaust assembly paste when fitting this part (not supplied).
• Designed for easy DIY fitment, however, if you have any doubts about fitting this part yourself then we recommend professional fitment.

This is a genuine Zaustworx part.

Designed, developed and manufactured by ourselves on our own premises in the UK.

We only use high quality UK sourced 304 grade stainless steel.

We have 25+ years experience in the exhaust industry.

The post Seat Leon Cupra 290 – Cat back exhaust (Unsilenced) appeared first on Zaustworx.

To fit:- Seat Leon Cupra 280

Year:- 2013 to 2015

• Does not fit estate models.
• Resonated ( Centre silencer, no rear silencer )

Description:-

The cat back exhaust for Seat Leon Cupra 280 is made from 2.5″ / 63.5mm mandrel-bent pipework and fits from the Catalytic converter, backwards.

We supply it with a choice of tailpipe options.

Upgrade your Seat Leon Cupra 280 with this high-quality performance cat-back exhaust system featuring a twin tailpipe design. This exhaust system enhances exhaust flow and improves engine efficiency, engineered to deliver a sportier sound and style. Designed for enthusiasts looking to enhance their vehicle’s performance without compromising on quality.

This 63.5mm mandrel-bent exhaust system will handle up to 480bhp.

• Only fits the vehicle listed. It will NOT fit any other vehicles.

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us if you require a fitting price.

You will need to allow 24 to 48 hours for dispatch (Excluding weekends) , as we make each order by hand.

There is a video of this exhaust on our youtube channel.

Click on the link below to listen to it.

Fitting Instructions:-

• Remove the old exhaust system from the vehicle and then fit the new replacement system into place
• You will need to use exhaust assembly paste when fitting this part (not supplied).
• Designed for easy DIY fitment, however, if you have any doubts about fitting this part yourself then we recommend professional fitment.

This is a genuine Zaustworx part.

Designed, developed and manufactured by ourselves on our own premises in the UK.

We only use high quality UK sourced 304 grade stainless steel.

We have 25+ years experience in the exhaust industry.

The post Seat Leon Cupra 280 – Cat back exhaust (Resonated) appeared first on Zaustworx.

To fit:- Seat Leon Cupra 280

Year:- 2013 to 2015

• Does not fit estate models.
• Unsilenced ( No silencers )
• Warning – Very loud

Description:-

The cat back exhaust for Seat Leon Cupra 280 is made from 2.5″ / 63.5mm mandrel-bent pipework and fits from the Catalytic converter, backwards.

We supply it with a choice of tailpipe options.

Upgrade your Seat Leon Cupra 280 with this high-quality performance cat-back exhaust system featuring a twin tailpipe design. This exhaust system enhances exhaust flow and improves engine efficiency, engineered to deliver a sportier sound and style. Designed for enthusiasts looking to enhance their vehicle’s performance without compromising on quality.

This 63.5mm mandrel-bent exhaust system will handle up to 480bhp.

• Only fits the vehicle listed. It will NOT fit any other vehicles.

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us if you require a fitting price.

You will need to allow 24 to 48 hours for dispatch (Excluding weekends) , as we make each order by hand.

There is a video of this exhaust on our youtube channel.

Click on the link below to listen to it.

Fitting Instructions:-

• Remove the old exhaust system from the vehicle and then fit the new replacement system into place
• You will need to use exhaust assembly paste when fitting this part (not supplied).
• Designed for easy DIY fitment, however, if you have any doubts about fitting this part yourself then we recommend professional fitment.

This is a genuine Zaustworx part.

Designed, developed and manufactured by ourselves on our own premises in the UK.

We only use high quality UK sourced 304 grade stainless steel.

We have 25+ years experience in the exhaust industry.

The post Seat Leon Cupra 280 – Cat back exhaust (Unsilenced) appeared first on Zaustworx.

To fit:- Seat Leon Cupra 265

Year:- 2013 to 2015

• Does not fit estate models.
• Resonated ( Centre silencer, no rear silencer )

Description:-

The cat back exhaust for Seat Leon Cupra 265 is made from 2.5″ / 63.5mm mandrel-bent pipework and fits from the Catalytic converter, backwards.

We supply it with a choice of tailpipe options.

Upgrade your Seat Leon Cupra 265 with this high-quality performance cat-back exhaust system featuring a twin tailpipe design. This exhaust system enhances exhaust flow and improves engine efficiency, engineered to deliver a sportier sound and style. Designed for enthusiasts looking to enhance their vehicle’s performance without compromising on quality.

This 63.5mm mandrel-bent exhaust system will handle up to 480bhp.

• Only fits the vehicle listed. It will NOT fit any other vehicles.

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us if you require a fitting price.

You will need to allow 24 to 48 hours for dispatch (Excluding weekends) , as we make each order by hand.

There is a video of this exhaust on our youtube channel.

Click on the link below to listen to it.

Fitting Instructions:-

• Remove the old exhaust system from the vehicle and then fit the new replacement system into place
• You will need to use exhaust assembly paste when fitting this part (not supplied).
• Designed for easy DIY fitment, however, if you have any doubts about fitting this part yourself then we recommend professional fitment.

This is a genuine Zaustworx part.

Designed, developed and manufactured by ourselves on our own premises in the UK.

We only use high quality UK sourced 304 grade stainless steel.

We have 25+ years experience in the exhaust industry.

The post Seat Leon Cupra 265 – Cat back exhaust (Resonated) appeared first on Zaustworx.

To fit:- Seat Leon 1.8 TSi Mk3 – 177bhp

Year:- 2013 to 2020

• Does not fit estate models.
• Non Resonated ( Rear silencer only, no centre silencer )

Description:-

The cat back exhaust for Seat Leon 1.8 TSi Mk3 is made from 2.5″ / 63.5mm mandrel-bent pipework and fits from the Catalytic converter, backwards.

We supply this exhaust system with a choice of tailpipe options.

Upgrade your Seat Leon 1.8 TSi Mk3 with this high-quality performance cat-back exhaust system featuring a twin tailpipe design. This exhaust system enhances exhaust flow and improves engine efficiency, engineered to deliver a sportier sound and style.

Designed for enthusiasts looking to enhance their vehicle’s performance without compromising on quality.

• Only fits the vehicle listed. It will NOT fit any other vehicles.

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us if you require a fitting price.

You will need to allow 24 to 48 hours for dispatch (Excluding weekends) , as we make each order by hand.

There is a video of this exhaust on our youtube channel.

Click on the link below to listen to it.

Fitting Instructions:-

• Remove the old exhaust system from the vehicle and then fit the new replacement system into place
• You will need to use exhaust assembly paste when fitting this part (not supplied).
• Designed for easy DIY fitment, however, if you have any doubts about fitting this part yourself then we recommend professional fitment.

This is a genuine Zaustworx part.

Designed, developed and manufactured by ourselves on our own premises in the UK.

We only use high quality UK sourced 304 grade stainless steel.

We have over 25+ years experience in the exhaust industry.

The post Seat Leon 1.8 TSi Mk3 – Cat back exhaust (Non Resonated) appeared first on Zaustworx.