BMW 220d F22 Rear Silencer Delete

Introducing our BMW 220d F22 Rear Silencer Delete, specifically designed for BMW 220d models produced between 2015 and 2021.

To fit:- BMW 220d F22 / F23 B47 ( 188bhp )

Year:- 2015 to 2021

• This kit will only fit the diesel models, it will not fit petrol models.
• Does not fit N47 models

Description:-

This high-quality silencer delete not only offers a subtle enhancement in exhaust sound but also provides a minor performance boost by eliminating the restrictive factory rear silencer.

By removing this component, you can experience a more liberated exhaust flow, which can contribute to improved engine efficiency and responsiveness.

It is important to note that when this silencer delete is installed as a standalone modification, the change in sound may be minimal.

For those seeking a more pronounced increase in exhaust note, we recommend pairing the silencer delete with additional modifications, such as a resonator delete pipe or a DPF (Diesel Particulate Filter) delete, or even both, if applicable.

Combining these components will amplify the auditory experience and further enhance performance, allowing you to unlock the full potential of your BMW 220d F22.

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price.

There is a video of our BMW 220d F22 exhaust on our YouTube channel.

Please click on the link below to listen to it.

(If there is no link here, there is no video available at the moment)

Fitting Instructions:

To install the rear silencer delete pipe, follow these straightforward steps for a seamless upgrade.

• Remove Standard Rear Silencer. Begin by carefully detaching the existing rear silencer from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust pipe approximately 8 inches away from the silencer to ensure a proper fit for the delete pipe.
• Install Delete Pipe. Once the factory exhaust has been cut, take the rear silencer delete pipe and clamp it securely into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post BMW 220d F22 Rear Silencer Delete appeared first on Zaustworx.

BMW 320d F30/F31 N47 – 335 Style Twin Exit Exhaust Conversion

Introducing our BMW 320d F30/F31 N47 335 Style Twin Exit Rear Silencer Delete / Exhaust Conversion Kit, designed to transform your 320d into a striking replica of the sporty 335i model.

To fit:- BMW 320d F30/F31 N47 ( 181bhp )

Year:- 2012 to 2015

• This kit will only fit the diesel models, it will not fit petrol models.
• Does not fit B47 models

Description:-

With this conversion kit, transforming your BMW 320d to resemble the sporty and sophisticated 335i has never been easier.

Our 335 style rear silencer delete seamlessly integrates with your existing exhaust system, providing a striking visual upgrade while optimizing performance.

Whether you’re looking to make a bold statement on the road or simply want to enjoy a more exhilarating driving experience, our conversion kit is the perfect solution.

Embrace the ultimate blend of style and functionality with our BMW 320d F30/F31 N47 335 Style Twin Exit Rear Exhaust Conversion Kit today!

Upgrade your BMW 320d F30/F31 N47 today and enjoy the sporty look of the 335i!

It is important to note that when this silencer delete is installed as a standalone modification, the change in sound may be minimal.

For those seeking a more pronounced increase in exhaust note, we recommend pairing the silencer delete with additional modifications, such as a resonator delete pipe or a DPF (Diesel Particulate Filter) delete, or even both, if applicable.

Combining these components will amplify the auditory experience and further enhance performance, allowing you to unlock the full potential of your BMW 320d F30/F31 N47.

Rear valance :-

This comprehensive kit comes with all the necessary components required for a seamless installation on your vehicle. ( Except rear valance )

You can source a genuine BMW rear valance from any authorized BMW dealership to complete your conversion.

If you prefer, you can also order from our local BMW main agent, Lloyd Colne BMW, who is more than happy to assist with mail orders. For inquiries, feel free to call them on 01282 881513 and ask for Robbo.

For the F30 and F31 models, the relevant part number for the rear valance is 51128054501.

Please keep in mind that we cannot guarantee proper fitment when used with aftermarket rear valances.

Important information :-

• • Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
  • Please check your exhaust carefully for compatibility before purchasing.
  • Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price.

There is a video of our BMW 320d F30/F31 N47 335 Style exhaust on our YouTube channel.

Please click on the link below to listen to it.

https://youtu.be/PgtGqdXEILU

https://youtu.be/zE6CBLL6INI

Fitting Instructions:

Installing the rear silencer delete pipes is a straightforward process that can enhance your vehicle’s performance and sound. Please follow the steps below carefully to ensure a proper fit and optimal results.

• Prepare the Standard Exhaust:
  Using a suitable cutting tool, carefully cut the factory exhaust pipe 8.5 inches away from the exhaust mount, as indicated in the accompanying photos. Ensure that the cut is clean and straight to facilitate a proper connection with the delete pipes.
• Install the Delete Pipes:
  Take the rear silencer delete pipes and position them where the standard exhaust was removed. Use the clamps provided in the kit to secure the delete pipes in place.
• Recommended Tools: For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste: When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help: This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post BMW 320d F30/F31 N47 – 335 Style Twin Exit Exhaust Conversion appeared first on Zaustworx.

BMW 318d F30/F31 N47 – 335 Style Twin Exit Exhaust Conversion

Introducing our BMW 318d F30/F31 N47 335 Style Twin Exit Rear Silencer Delete / Exhaust Conversion Kit, designed to transform your 318d into a striking replica of the sporty 335i model.

To fit:- BMW 318d F30/F31 N47 ( 141bhp )

Year:- 2012 to 2015

• This kit will only fit the diesel models, it will not fit petrol models.
• Does not fit B47 models

Description:-

With this conversion kit, transforming your BMW 318d to resemble the sporty and sophisticated 335i has never been easier.

Our 335 style rear silencer delete seamlessly integrates with your existing exhaust system, providing a striking visual upgrade while optimizing performance.

Whether you’re looking to make a bold statement on the road or simply want to enjoy a more exhilarating driving experience, our conversion kit is the perfect solution.

Embrace the ultimate blend of style and functionality with our BMW 318d F30/F31 N47 335 Style Twin Exit Rear Exhaust Conversion Kit today!

Upgrade your BMW 318d F30/F31 N47 today and enjoy the sporty look of the 335i!

It is important to note that when this silencer delete is installed as a standalone modification, the change in sound may be minimal.

For those seeking a more pronounced increase in exhaust note, we recommend pairing the silencer delete with additional modifications, such as a resonator delete pipe or a DPF (Diesel Particulate Filter) delete, or even both, if applicable.

Combining these components will amplify the auditory experience and further enhance performance, allowing you to unlock the full potential of your BMW 318d F30/F31 N47.

Rear valance :-

This comprehensive kit comes with all the necessary components required for a seamless installation on your vehicle. ( Except rear valance )

You can source a genuine BMW rear valance from any authorized BMW dealership to complete your conversion.

If you prefer, you can also order from our local BMW main agent, Lloyd Colne BMW, who is more than happy to assist with mail orders. For inquiries, feel free to call them on 01282 881513 and ask for Robbo.

For the F30 and F31 models, the relevant part number for the rear valance is 51128054501.

Please keep in mind that we cannot guarantee proper fitment when used with aftermarket rear valances.

Important information :-

• • Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
  • Please check your exhaust carefully for compatibility before purchasing.
  • Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price.

There is a video of our BMW 318d F30/F31 N47 335 Style exhaust on our YouTube channel.

Please click on the link below to listen to it.

https://youtu.be/3oQqwcDhI5I

Fitting Instructions:

Installing the rear silencer delete pipes is a straightforward process that can enhance your vehicle’s performance and sound. Please follow the steps below carefully to ensure a proper fit and optimal results.

• Prepare the Standard Exhaust:
  Using a suitable cutting tool, carefully cut the factory exhaust pipe 8.5 inches away from the exhaust mount, as indicated in the accompanying photos. Ensure that the cut is clean and straight to facilitate a proper connection with the delete pipes.
• Install the Delete Pipes:
  Take the rear silencer delete pipes and position them where the standard exhaust was removed. Use the clamps provided in the kit to secure the delete pipes in place.
• Recommended Tools: For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste: When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help: This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post BMW 318d F30/F31 N47 – 335 Style Twin Exit Exhaust Conversion appeared first on Zaustworx.

BMW 316d F30/F31 N47 – 335 Style Twin Exit Exhaust Conversion

Introducing our BMW 316d F30/F31 N47 335 Style Twin Exit Rear Silencer Delete / Exhaust Conversion Kit, designed to transform your 316d into a striking replica of the sporty 335i model.

To fit:- BMW 316d F30/F31 N47 ( 114bhp )

Year:- 2012 to 2015

• This kit will only fit the diesel models, it will not fit petrol models.
• Does not fit B47 models

Description:-

With this conversion kit, transforming your BMW 316d to resemble the sporty and sophisticated 335i has never been easier.

Our 335 style rear silencer delete seamlessly integrates with your existing exhaust system, providing a striking visual upgrade while optimizing performance.

Whether you’re looking to make a bold statement on the road or simply want to enjoy a more exhilarating driving experience, our conversion kit is the perfect solution.

Embrace the ultimate blend of style and functionality with our BMW 316d F30/F31 N47 335 Style Twin Exit Rear Exhaust Conversion Kit today!

Upgrade your BMW 316d F30/F31 N47 today and enjoy the sporty look of the 335i!

It is important to note that when this silencer delete is installed as a standalone modification, the change in sound may be minimal.

For those seeking a more pronounced increase in exhaust note, we recommend pairing the silencer delete with additional modifications, such as a resonator delete pipe or a DPF (Diesel Particulate Filter) delete, or even both, if applicable.

Combining these components will amplify the auditory experience and further enhance performance, allowing you to unlock the full potential of your BMW 316d F30/F31 N47.

Rear valance :-

This comprehensive kit comes with all the necessary components required for a seamless installation on your vehicle. ( Except rear valance )

You can source a genuine BMW rear valance from any authorized BMW dealership to complete your conversion.

If you prefer, you can also order from our local BMW main agent, Lloyd Colne BMW, who is more than happy to assist with mail orders. For inquiries, feel free to call them on 01282 881513 and ask for Robbo.

For the F30 and F31 models, the relevant part number for the rear valance is 51128054501.

Please keep in mind that we cannot guarantee proper fitment when used with aftermarket rear valances.

Important information :-

• • Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
  • Please check your exhaust carefully for compatibility before purchasing.
  • Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price.

There is a video of our BMW 316d F30/F31 N47 335 Style exhaust on our YouTube channel.

Please click on the link below to listen to it.

(If there is no link here, there is no video available at the moment)

Fitting Instructions:

Installing the rear silencer delete pipes is a straightforward process that can enhance your vehicle’s performance and sound. Please follow the steps below carefully to ensure a proper fit and optimal results.

• Prepare the Standard Exhaust:
  Using a suitable cutting tool, carefully cut the factory exhaust pipe 8.5 inches away from the exhaust mount, as indicated in the accompanying photos. Ensure that the cut is clean and straight to facilitate a proper connection with the delete pipes.
• Install the Delete Pipes:
  Take the rear silencer delete pipes and position them where the standard exhaust was removed. Use the clamps provided in the kit to secure the delete pipes in place.
• Recommended Tools: For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste: When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help: This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post BMW 316d F30/F31 N47 – 335 Style Twin Exit Exhaust Conversion appeared first on Zaustworx.

BMW 330d F30/F31 335i Style Rear Silencer Delete

Introducing our BMW 330d F30/F31 335i style Rear Silencer Delete / Exhaust Conversion Kit, designed to transform your 330d into a striking replica of the sporty 335i model.

To fit:- BMW 330d F30/F31 M Sport – 255bhp

Year:- 2012 to 2019

• Does not fit petrol models.

Description:-

This meticulously crafted kit features our innovative cast stainless steel T-piece, which ensures durability and a perfect fit. Additionally, the mandrel-bent pipework guarantees smooth exhaust flow, enhancing both sound and efficiency.

With this conversion kit, transforming your BMW 330d to resemble the sporty and sophisticated 335i has never been easier. Our 335i style rear silencer delete seamlessly integrates with your existing exhaust system, providing a striking visual upgrade while optimizing performance.

Whether you’re looking to make a bold statement on the road or simply want to enjoy a more exhilarating driving experience, our conversion kit is the perfect solution. Embrace the ultimate blend of style and functionality with our BMW 330d F30/F31 335i Style Rear Silencer delete / Exhaust Conversion Kit today!

Upgrade your BMW 330d F30/F31 today and enjoy the sporty look of the 335i!

It is important to note that when this silencer delete is installed as a standalone modification, the change in sound may be minimal.

For those seeking a more pronounced increase in exhaust note, we recommend pairing the silencer delete with additional modifications, such as a resonator delete pipe or a DPF (Diesel Particulate Filter) delete, or even both, if applicable.

Combining these components will amplify the auditory experience and further enhance performance, allowing you to unlock the full potential of your BMW 330d F30/F31.

Rear valance :-

This comprehensive kit comes with all the necessary components required for a seamless installation on your vehicle. ( Except rear valance )

You can source a genuine BMW rear valance from any authorized BMW dealership to complete your conversion.

If you prefer, you can also order from our local BMW main agent, Lloyd Colne BMW, who is more than happy to assist with mail orders. For inquiries, feel free to call them on 01282 881513 and ask for Robbo.

For the F30 and F31 models, the relevant part number for the rear valance is 51128054501.

Please keep in mind that we cannot guarantee proper fitment when used with aftermarket rear valance.

• Important information :-

  • Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
  • Please check your exhaust carefully for compatibility before purchasing.
  • Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price.

There is a video of our BMW 330d F30/F31 exhaust on our YouTube channel.

Please click on the link below to listen to it.

https://youtu.be/xJAkopM1UZA

Fitting Instructions:

To install the rear silencer delete pipes, follow these straightforward steps for a seamless upgrade.

• Remove Standard Rear Silencer. Begin by carefully detaching the existing rear silencer from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust pipe approximately 7 inches away from the silencer to ensure a proper fit for the delete pipes.
• Install Delete Pipe. Once the factory exhaust has been cut, take the rear silencer delete pipe and clamp it securely into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post BMW 330d F30/F31 335i Style Rear Silencer Delete appeared first on Zaustworx.

BMW 330d F30 Rear Silencer Delete

Introducing our BMW 330d F30 Rear Silencer Delete, specifically designed for BMW 330d models produced between 2012 and 2019.

To fit:- BMW 330d M Sport (F30 / F31) 255bhp

Year:- 2012 to 2019

• Fits all models including automatic and x drive.
• Does not fit petrol models.

Description:-

This high-quality silencer delete not only offers a subtle enhancement in exhaust sound but also provides a minor performance boost by eliminating the restrictive factory rear silencer.

By removing this component, you can experience a more liberated exhaust flow, which can contribute to improved engine efficiency and responsiveness.

It is important to note that when this silencer delete is installed as a standalone modification, the change in sound may be minimal.

For those seeking a more pronounced increase in exhaust note, we recommend pairing the silencer delete with additional modifications, such as a resonator delete pipe or a DPF (Diesel Particulate Filter) delete, or even both, if applicable.

Combining these components will amplify the auditory experience and further enhance performance, allowing you to unlock the full potential of your BMW 330d.

Important information :-

• Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust.
• Please check your exhaust carefully for compatibility before purchasing.
• Only fits the vehicle listed. It will NOT fit any other vehicles.

• Fully reversible.
• Clamp on fitment, so no welding required.
• Supplied with clamps required for fitting.
• Premium quality 304 grade stainless steel.
• Lifetime guarantee.
• Fitting is available if required.
• Contact us on 01282 414902 if you require a fitting price.

There is a video of our BMW 330d F30 exhaust on our YouTube channel.

Please click on the link below to listen to it.

https://youtu.be/cqPRSJ02Ffg

Fitting Instructions:

To install the rear silencer delete pipes, follow these straightforward steps for a seamless upgrade.

• Remove Standard Rear Silencer. Begin by carefully detaching the existing rear silencer from your vehicle’s exhaust system.
• Prepare the Exhaust. Using the provided photos as a reference. Measure and cut the exhaust pipe approximately 7 inches away from the silencer to ensure a proper fit for the delete pipes.
• Install Delete Pipe. Once the factory exhaust has been cut, take the rear silencer delete pipe and clamp it securely into position.
• Recommended Tools. For a clean and precise cut, we strongly recommend using a power saw. This tool will provide you with easier access and greater accuracy compared to manual cutting methods.
• Use Exhaust Assembly Paste. When fitting the delete pipes, it’s essential to use exhaust assembly paste to create a secure seal. Please note that this paste is not supplied with the product, so be sure to have it on hand before you begin your installation.
• DIY or Professional Help. This kit is designed for easy do-it-yourself installation, making it accessible for most car enthusiasts. However, if you have any uncertainties or lack the necessary tools, we highly advise seeking the assistance of a professional mechanic to ensure the installation is completed safely and effectively.

By following these instructions carefully, you can enhance your vehicle’s exhaust system with confidence. Enjoy the improved performance and sound that comes with your new rear silencer delete pipe!

Shipping :-

Satisfaction :-

Please contact us on our Facebook page if you have any questions about this part. www.facebook.com/ZaustworxCustomExhausts/

The post BMW 330d F30 Rear Silencer Delete appeared first on Zaustworx.

To fit:- BMW 328i F30/F31/F34 N20 – 241 BHP

Year :- 2012 to 2015

This is our 4″ stainless steel decat downpipe for the BMW 328i F30/F31/F34 N20

• Does not fit models with GPF / PPF / OPF unless it has been coded out and can be removed.

Will also fit the following vehicles.

• 125i F20/F21 N20 215BHP- 2012-2015
• 220i F22/F23 N20 181BHP- 2014-2016
• 228i F22/F23 N20 241BHP 2014-2016
• 320i F30/F31/F34 N20 181BHP 2012-2015
• 328i F30/F31/F34 N20 241BHP- 2012-2015
• 420i F32/F33 N20 181BHP- 2014-2016
• 428i F32/F33 N20 241BHP- 2013-2016
• 528i F10 N20 241BHP- 2012-2016
• Z4 S DRIVE 28i E89 N20 241BHP- 2011-2016
• X1 S DRIVE 20i E84 N20 181BHP- 2011-2015
• X1 S DRIVE 28i E84 N20 241BHP- 2011-2015
• X3 S DRIVE 20i F25 N20 181BHP- 2011-2017
• X3 X DRIVE 20i F25 N20 181BHP- 2011-2017
• X3 X DRIVE 28i F25 N20 242BHP- 2012-2017
• X4 X DRIVE 20i F26 N20 181 BHP- 2014-2018
• X4 X DRIVE 28i F26 N20 241BHP- 2014-2018
• X5 X DRIVE 40e F15 N20 308BHP- 2015-2018

• Designed for off-road / track use only.

Fitting a decat downpipe may activate an EML warning light, so we recommend that the ecu will need to be coded when fitting this downpipe.

We recommend fitting a new turbo gasket when fitting this part.

Specification :-

This 4″ (101mm ) decat downpipe is made from the highest quality 304 grade mandrel bent stainless steel.

Will give noticeable power gains and a more aggressive exhaust note.

• 4″ bore ( 101mm ) including flexi
• Two Lambda sensor bung.
• Designed to be a direct bolt on replacement for the oem catalytic converter.
• Manufactured from high quality 304 grade stainless steel.
• Mandrel bent and tig welded.
• CNC Machined flanges for an accurate fit.
• High quality flexi joint.
• You will gain an improvement in throttle response.
• Improves power and torque.
• Increased performance and driveability.
• Suitable for aftermarket and oem cat back exhausts.
• Lifetime Guarantee.

Fitting a decat downpipe will give an increase in power and torque throughtout the enitre rpm range which will give an improvement in performance and driveability.

Improves throttle response and reduces underbonnet temperatures.

Sold for off road and motorsport use only and will not pass an MOT emissions test.

Legal information :

It is illegal in the UK to remove any of the original factory fitted emissions equipment fitted to a vehicle.

It is the customers responsibility to ensure that they comply with the relevant rules, regulations and laws in their own country.

Zaustworx accepts no responsibility for the use of this part on the public highway.

Fitting :

Does not come with fitting instructions.

We recommend that this part is fitted by a competent person or qualified mechanic to ensure correct fitment.

Contact us on our facebook page if you have any questions about this product

https://www.facebook.com/ZaustworxCustomExhausts/

Or you can contact us on 01282 414902

The post BMW 328i F30/F31/F34 N20 – Stainless Steel Decat Downpipe appeared first on Zaustworx.

To fit:- BMW 320i F30/F31/F34 N20- 181 BHP

Year :- 2012 to 2015

This is our 4″ stainless steel decat downpipe for the BMW 320i F30/F31/F34 N20

• Does not fit models with GPF / PPF / OPF unless it has been coded out and can be removed.

Will also fit the following vehicles.

• 125i F20/F21 N20 215BHP- 2012-2015
• 220i F22/F23 N20 181BHP- 2014-2016
• 228i F22/F23 N20 241BHP 2014-2016
• 320i F30/F31/F34 N20 181BHP 2012-2015
• 328i F30/F31/F34 N20 241BHP- 2012-2015
• 420i F32/F33 N20 181BHP- 2014-2016
• 428i F32/F33 N20 241BHP- 2013-2016
• 528i F10 N20 241BHP- 2012-2016
• Z4 S DRIVE 28i E89 N20 241BHP- 2011-2016
• X1 S DRIVE 20i E84 N20 181BHP- 2011-2015
• X1 S DRIVE 28i E84 N20 241BHP- 2011-2015
• X3 S DRIVE 20i F25 N20 181BHP- 2011-2017
• X3 X DRIVE 20i F25 N20 181BHP- 2011-2017
• X3 X DRIVE 28i F25 N20 242BHP- 2012-2017
• X4 X DRIVE 20i F26 N20 181 BHP- 2014-2018
• X4 X DRIVE 28i F26 N20 241BHP- 2014-2018
• X5 X DRIVE 40e F15 N20 308BHP- 2015-2018

• Designed for off-road / track use only.

Fitting a decat downpipe may activate an EML warning light, so we recommend that the ecu will need to be coded when fitting this downpipe.

We recommend fitting a new turbo gasket when fitting this part.

Specification :-

This 4″ (101mm ) decat downpipe is made from the highest quality 304 grade mandrel bent stainless steel.

Will give noticeable power gains and a more aggressive exhaust note.

• 4″ bore ( 101mm ) including flexi
• Two Lambda sensor bung.
• Designed to be a direct bolt on replacement for the oem catalytic converter.
• Manufactured from high quality 304 grade stainless steel.
• Mandrel bent and tig welded.
• CNC Machined flanges for an accurate fit.
• High quality flexi joint.
• You will gain an improvement in throttle response.
• Improves power and torque.
• Increased performance and driveability.
• Suitable for aftermarket and oem cat back exhausts.
• Lifetime Guarantee.

Fitting a decat downpipe will give an increase in power and torque throughtout the enitre rpm range which will give an improvement in performance and driveability.

Improves throttle response and reduces underbonnet temperatures.

Sold for off road and motorsport use only and will not pass an MOT emissions test.

Legal information :

It is illegal in the UK to remove any of the original factory fitted emissions equipment fitted to a vehicle.

It is the customers responsibility to ensure that they comply with the relevant rules, regulations and laws in their own country.

Zaustworx accepts no responsibility for the use of this part on the public highway.

Fitting :

Does not come with fitting instructions.

We recommend that this part is fitted by a competent person or qualified mechanic to ensure correct fitment.

Contact us on our facebook page if you have any questions about this product

https://www.facebook.com/ZaustworxCustomExhausts/

Or you can contact us on 01282 414902

The post BMW 320i F30/F31/F34 N20 – Stainless Steel Decat Downpipe appeared first on Zaustworx.

To fit:- BMW 330i/330ix F30/F31/F34GT B48 – 248 BHP

Year :- 2015 to 2019

This is our 4″ stainless steel decat downpipe for the BMW 330i/330ix F30/F31/F34GT B48

• Does not fit models with GPF / PPF / OPF unless it has been coded out and can be removed.

Will also fit the following vehicles.

• 120i F20/F21 B48 181BHP- 2016-2019
• 125i F20 / F21 B48 221bhp – 2016-2019
• 220i F22 / F23 B48 181bhp – 2016-2021
• 230i F22 / F23 B48 248bhp – 2016-2021
• 330i/ 330ix F30/F31/F34GT B48 248BHP- 2015-2019
• 330E F30/F31 B48 248 BHP- 2015-2018
• 420i/ 420ix F32/F33/F36 B48 181BHP 2016-2019
• 430i/ 430ix F32/ F33/ F36 B48- 248 bhp- 2016-2019
• 730i/ 730Li G11/G12 B48 255 BHP- 2016+
• 740e/ 740Le G11/G12 B48 322BHP- 2016+
• Designed for off-road / track use only.

Fitting a decat downpipe may activate an EML warning light, so we recommend that the ecu will need to be coded when fitting this downpipe.

We recommend fitting a new turbo gasket when fitting this part.

This 4″ (101mm ) decat downpipe is made from the highest quality 304 grade mandrel bent stainless steel.

Will give noticeable power gains and a more aggressive exhaust note.

• 4″ bore ( 101mm ) including flexi
• Two Lambda sensor bung.
• Designed to be a direct bolt on replacement for the oem catalytic converter.
• Manufactured from high quality 304 grade stainless steel.
• Mandrel bent and tig welded.
• CNC Machined flanges for an accurate fit.
• High quality flexi joint.
• You will gain an improvement in throttle response.
• Improves power and torque.
• Increased performance and driveability.
• Suitable for aftermarket and oem cat back exhausts.
• Lifetime Guarantee.

Fitting a decat downpipe will give an increase in power and torque throughtout the enitre rpm range which will give an improvement in performance and driveability.

Improves throttle response and reduces underbonnet temperatures.

Sold for off road and motorsport use only and will not pass an MOT emissions test.

Legal information :

It is illegal in the UK to remove any of the original factory fitted emissions equipment fitted to a vehicle.

It is the customers responsibility to ensure that they comply with the relevant rules, regulations and laws in their own country.

Zaustworx accepts no responsibility for the use of this part on the public highway.

Fitting :

Does not come with fitting instructions.

We recommend that this part is fitted by a competent person or qualified mechanic to ensure correct fitment.

Contact us on our facebook page if you have any questions about this product

https://www.facebook.com/ZaustworxCustomExhausts/

Or you can contact us on 01282 414902

The post BMW 330i/330ix F30/F31/F34GT B48 – Stainless Steel Decat Downpipe appeared first on Zaustworx.

To fit:- BMW 330e F30/F31 B48 – 248 BHP

Year :- 2015 to 2018

This is our 4″ stainless steel decat downpipe for the BMW 330e F30/F31 B48

• Does not fit models with GPF / PPF / OPF unless it has been coded out and can be removed.

Will also fit the following vehicles.

• 120i F20/F21 B48 181BHP- 2016-2019
• 125i F20 / F21 B48 221bhp – 2016-2019
• 220i F22 / F23 B48 181bhp – 2016-2021
• 230i F22 / F23 B48 248bhp – 2016-2021
• 330i/ 330ix F30/F31/F34GT B48 248BHP- 2015-2019
• 330E F30/F31 B48 248 BHP- 2015-2018
• 420i/ 420ix F32/F33/F36 B48 181BHP 2016-2019
• 430i/ 430ix F32/ F33/ F36 B48- 248 bhp- 2016-2019
• 730i/ 730Li G11/G12 B48 255 BHP- 2016+
• 740e/ 740Le G11/G12 B48 322BHP- 2016+
• Designed for off-road / track use only.

Fitting a decat downpipe may activate an EML warning light, so we recommend that the ecu will need to be coded when fitting this downpipe.

We recommend fitting a new turbo gasket when fitting this part.

This 4″ (101mm ) decat downpipe is made from the highest quality 304 grade mandrel bent stainless steel.

Will give noticeable power gains and a more aggressive exhaust note.

• 4″ bore ( 101mm ) including flexi
• Two Lambda sensor bung.
• Designed to be a direct bolt on replacement for the oem catalytic converter.
• Manufactured from high quality 304 grade stainless steel.
• Mandrel bent and tig welded.
• CNC Machined flanges for an accurate fit.
• High quality flexi joint.
• You will gain an improvement in throttle response.
• Improves power and torque.
• Increased performance and driveability.
• Suitable for aftermarket and oem cat back exhausts.
• Lifetime Guarantee.

Fitting a decat downpipe will give an increase in power and torque throughtout the enitre rpm range which will give an improvement in performance and driveability.

Improves throttle response and reduces underbonnet temperatures.

Sold for off road and motorsport use only and will not pass an MOT emissions test.

Legal information :

It is illegal in the UK to remove any of the original factory fitted emissions equipment fitted to a vehicle.

It is the customers responsibility to ensure that they comply with the relevant rules, regulations and laws in their own country.

Zaustworx accepts no responsibility for the use of this part on the public highway.

Fitting :

Does not come with fitting instructions.

We recommend that this part is fitted by a competent person or qualified mechanic to ensure correct fitment.

Contact us on our facebook page if you have any questions about this product

https://www.facebook.com/ZaustworxCustomExhausts/

Or you can contact us on 01282 414902

The post BMW 330e F30/F31 B48 – Stainless Steel Decat Downpipe appeared first on Zaustworx.